The Mass Storage driver doesn't support these types of devices yet.  It
probably will in the near future.

Matt Dharm

On Sun, 26 Mar 2000, Greg Katz wrote:

> I have a Sony Spressa. In /proc/bus/usb the driver is listed as none
> even though I have loaded the Mass storage driver. Any Idea's?
> 
> It is listed as E-USB Bridge
> 
> 
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 0.00
> S:  Product=USB UHCI Root Hub
> S:  SerialNumber=e000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=045e ProdID=001e Rev= 1.03
> S:  Manufacturer=Microsoft
> S:  Product=Microsoft IntelliMouse� Explorer
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usb_mouse
> E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl= 10ms
> T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=04e6 ProdID=0101 Rev= 2.00
> S:  Manufacturer=Shuttle Technology Inc.
> S:  Product=E-USB Bridge
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl= 32ms
> 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
> 

-- 
Matthew Dharm                              Home: [EMAIL PROTECTED] 
Engineer, Qualcomm, Inc.                         Work: [EMAIL PROTECTED]

Oh BAY-bee.
                                        -- Dust Puppy to Greg
User Friendly, 12/13/1997


---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to