> -----Original Message-----
> From: Georg Acher [mailto:[EMAIL PROTECTED]]
> Sent: Friday, March 31, 2000 5:39 PM
> To: '[EMAIL PROTECTED]'
> Subject: Re: [linux-usb] HCD problem with USB CDROM
> Some questions:
>
> Does it work again after unplug/replug? Does it work again after unloading
> all modules, but without unplugging?
Yes. It works after unplugging/repluging the usb-drive, and after
unloading/reloading usb-uhci.
A little more info I learned: In the cases where it doesn't work the first
time (~20% of the time with usb-uhci), I can unload/reload usb-storage, and
it will work the 2nd time. However, if I unload/relaod again, it goes back
to previous behaviour (can't get it to work in any further attempts to
unload/reload, (or until unplug/replug or unload/reload of usb-uhci).
I also found out that doing a suspend (with APM not ASPI) also causes the
load of usb-storage to not work (with the same messages), but I don't know
if this is a related problem or not.
Thanks,
.Geoff
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
