On Wed, May 10, 2000 at 02:17:41PM -0700, Matthew Dharm wrote:
> According to the sense data being returned by the device, you need to
> wait longer before accessing it. It's reporting "LOGICAL DRIVE NOT READY
> -- BECOMING READY"
Odd, it's a flash memory reader - should be ready almost instantly. And
> I would recommend modprobing the driver, then waiting several seconds
> before trying to mount the CD.
Not a CD - it's a SmartMedia flash card, and I can't wait between
loading the usb-storage and accessing the device, because the system
automatically tries to access the partition table (and fails).
By the way, the first thing that seems to be failing now is the
READ_CAPACITY request - could it be possible that it also needs a
different length?
> > 47:08 Vendor: HAGIWARA Model: SmartMedia R/W Rev: 1.00
> > 47:08 Type: Direct-Access ANSI SCSI revision: 02
> > 47:08 Detected scsi removable disk sda at scsi0, channel 0, id 0, lun 0
> > 47:08 usb-storage.c: Command READ_CAPACITY (10 bytes)
> > 47:08 usb-storage.c: 25 00 00 00 00 00 00 00 00 00
> > 47:08 usb-storage.c: Bulk command S 0x43425355 T 0x14 LUN 0 L 8 F 128 CL 10
> > 47:08 usb-storage.c: Bulk command transfer result=0
> > 47:08 usb-storage.c: Bulk xfer 0xc0477000(8)
> > 47:08 usb-uhci.c: interrupt, status 3, frame# 992
> > 47:08 usb-storage.c: bulk_msg returned -32 xferred 0/8
> > 47:08 usb-storage.c: clearing endpoint halt for pipe 0xc0008580
> > 47:11 usb_control/bulk_msg: timeout
--
Vojtech Pavlik
SuSE Labs
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
