On Tue, May 16, 2000 at 10:27:52AM +0200, Marc Dietrich wrote:
>
> Hello Greg and thanks for replying,
>
> the modem accepts commands I sent to it. For example it dials when I sent
> atdt.... . But I can't receive anything from it - only sometimes a few
> brocken charaters.
Hey, that's very encouraging! Maybe we just need to play around with the
different endpoints. Since I am assuming that you are trying to send data
through the first endpoint pairs (ttyUSB0) you might want to open up
another minicom window and attach it to ttyUSB1 to see if the input data
comes in through there, while you are sending data to ttyUSB0.
And I bet the interrupt pipe is used to send some kind of flow control
information.
At least it sounds like this isn't a "Winmodem" and there might be a
chance to get this to work with Linux.
> I will ask Lasat again for some information. I also have one of these
> Windoof computers, but not enough experiances to do usb driver
> debugging. Well, I'll try it.
If you could, you might try to use the usb snoop program that was
mentioned here on the mailing list, to get a dump of a simple windows
session using your modem. That might tell me enough to get the device to
work.
If you need any help in contacting the company for specs, feel free to
ask.
thanks,
greg k-h
greg@(kroah|wirex).com
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
