Linux is hanging when we test our USB serial converter
digi_acceleport.c on an SMP machine. We are running 2.3.99-pre9-2
SMP on an ASUS P2B-D motherboard with two PII processors. We
are using usb-uhci.
We run a test that uses select/read/write to send data through
one of our serial ports as fast as possible. On a UP kernel
the test does not hang the system, but on an SMP kernel the
test hangs the system almost every time. Both processors are
hung, there is no response from the system, and we must reboot.
One processor is stuck in wait_on_irq() waiting for an IRQ handler
to finish on the other processor. The function wait_on_irq prints
out a stack backtrace after waiting for a while; that stack trace,
sent through ksymoops, is attached. The trace shows the other
processor is in usb-uhci/usbcore--I have not tried to track down
what is happening here. The stack trace on this other processor
is quite long--the first few lines are
CPU Trace; c8824000 <_end+85147b0/8514800>
Trace; c882c000 <[usbcore]__kstrtab_usb_bulk_msg+ca6/cf6>
Trace; c882c8f8 <[usb-uhci]append_qh+0/44>
Trace; c88313a1 <[usb-uhci].data.end+a/4d9>
Trace; c882c428 <[usb-uhci]uhci_show_status+0/234>
Trace; c88313ab <[usb-uhci].data.end+14/4d9>
Trace; c882d948 <[usb-uhci]uhci_clean_iso_step1+0/34>
Trace; c88313bc <[usb-uhci].data.end+25/4d9>
Trace; c882d97c <[usb-uhci]uhci_clean_iso_step2+0/28>
Trace; c88313d1 <[usb-uhci].data.end+3a/4d9>
Trace; c882cb68 <[usb-uhci]insert_qh+0/a4>
Trace; c88313e6 <[usb-uhci].data.end+4f/4d9>
Trace; c882ccec <[usb-uhci]cleanup_skel+0/128>
Trace; c88313f0 <[usb-uhci].data.end+59/4d9>
Trace; c882ca10 <[usb-uhci]unlink_td+0/84>
I have also attached /var/log/messages with USB verbose debugging
set.
Unfortunately I don't have much time to look into this right now--but
I would be glad to provide any further information if anyone wants it.
Thanks for any help with this problem.
-- Al
ksymoops 0.7c on i686 2.3.99-pre9. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.3.99-pre9/ (default)
-m /usr/src/linux/System.map (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
wait_on_irq, CPU 0:
irq: 1 [ 0 1 ]
bh: 0 [ 1 0 ]
Call Trace: [<c8824000>] [<c882c000>] [<c882c8f8>] [<c88313a1>] [<c882c428>]
[<c88313ab>] [<c882d948>]
[<c88313bc>] [<c882d97c>] [<c88313d1>] [<c882cb68>] [<c88313e6>] [<c882ccec>]
[<c88313f0>] [<c882ca10>]
[<c88313fd>] [<c882de44>] [<c8831407>] [<c882e848>] [<c883141d>] [<c882e16c>]
[<c8831431>] [<c882e990>]
[<c8831445>] [<c882f114>] [<c8831455>] [<c882c720>] [<c8831465>] [<c882e8e4>]
[<c8831477>] [<c882f4f8>]
[<c8831483>] [<c882c770>] [<c8831495>] [<c8831350>] [<c88314a8>] [<c8831870>]
[<c88314b9>] [<c882e610>]
[<c88314d4>] [<c882fb48>] [<c88314e4>] [<c8831362>] [<c88314ed>] [<c882e9d4>]
[<c8831501>] [<c882f20c>]
[<c8831513>] [<c882fc00>] [<c8831521>] [<c882ea38>] [<c883152a>] [<c882f25c>]
[<c8831538>] [<c882f0e0>]
[<c8831549>] [<c8830420>] [<c8831557>] [<c88300c4>] [<c8831578>] [<c882cc98>]
[<c8831583>] [<c882c6a8>]
[<c8831592>] [<c882c93c>] [<c88315a8>] [<c882c844>] [<c88315b2>] [<c882f8b8>]
[<c88315bb>] [<c883137b>]
[<c88315c7>] [<c882e374>] [<c88315d8>] [<c882fda8>] [<c88315ec>] [<c882df44>]
[<c88315fc>] [<c882e068>]
[<c883160c>] [<c882c6e8>] [<c883161b>] [<c882d24c>] [<c883162c>] [<c882fc84>]
[<c8831644>] [<c882ca94>]
[<c8831655>] [<c882d538>] [<c8831661>] [<c882fddc>] [<c8831676>] [<c8831348>]
[<c8831681>] [<c882cc0c>]
[<c883169e>] [<c883134c>] [<c88316a8>] [<c882c050>] [<c88316b5>] [<c882db78>]
[<c88316d5>] [<c882cc48>]
[<c88316ea>] [<c882fa54>] [<c88316f4>] [<c882f184>] [<c8831703>] [<c882e598>]
[<c8831712>] [<c882f240>]
[<c8831720>] [<c882ccd0>] [<c883173e>] [<c882d9a4>] [<c8831746>] [<c882c000>]
[<c883175a>] [<c882c65c>]
[<c88317a7>] [<c882f700>] [<c88317b3>] [<c882f188>] [<c88317bf>] [<c882ce14>]
[<c88317d0>] [<c882dfc4>]
[<c88317da>] [<c882c7d0>] [<c88317ea>] [<c882dcf8>] [<c88317f4>] [<c883017c>]
[<c8831808>] [<c882caac>]
[<c8831812>] [<c883026c>] [<c883181b>] [<c882c9b4>] [<c8831828>] [<c882c7fc>]
[<c883183d>] [<c882fd48>]
[<c8831849>] [<c8831384>] [<c8831858>] [<d5e85074>] [<dde8c883>] [<ff4403e8>]
[<f8892824>] [<e8503024>]
[<f78fe8dc>] [<f68921eb>] [<e8570789>] [<e5e85717>] [<eb04c483>] [<c9315657>]
[<d8291704>] [<e8c0288a>]
[<f78f0458>] [<e8560d6a>] [<f79af318>] [<f689c30c>] [<c8831870>] [<c8831140>]
[<c8831187>] [<eb04c483>]
[<e8c88312>] [<f78ea008>] [<eb08c483>] [<e8c88312>] [<f78e9fc8>] [<e85308eb>]
[<e8000c03>] [<f79aeb30>]
[<f68913eb>] [<c8831348>] [<fa06e852>] [<c8831870>] [<d876e850>] [<f689c304>]
[<fffeabe8>] [<f689c3ff>]
[<f3007c7a>] [<e9f87e90>] [<f87e90f3>] [<ffc4dce9>] [<f57e90f3>] [<ffc5fce9>]
[<f57e90f3>] [<ffc62ee9>]
[<f57e90f3>] [<ffc698e9>] [<f57e90f3>] [<ffc6dfe9>] [<f3007c7f>] [<e9f87e90>]
[<f87e90f3>] [<ffd802e9>]
[<d8c7e9f8>] [<f300247e>] [<e9f87e90>] [<f87e90f3>] [<ffdc32e9>] [<e2a9e9f8>]
[<f300247e>] [<e9f87e90>]
[<f87e90f3>] [<fff1cbe9>] [<f63ae9f8>] [<c882ecd6>] [<c882ecf8>] [<c882f0bb>]
[<c882f0bb>] [<c882f0bb>]
[<c882f0bb>] [<c882f0bb>] [<c882ecf1>] [<c882f0bb>] [<c882f0bb>] [<c882f0bb>]
[<c882f0bb>] [<c882f0bb>]
[<c882f0bb>] [<c882f0bb>] [<c882ed18>] [<c882ed40>] [<c882ecf1>] [<c882ecf1>]
[<c882ed62>]
Call Trace: [<c0222053>] [<c010cafd>] [<c0222068>] [<c018341f>] [<c0189e45>]
[<c011ff47>] [<c011fe6a>]
[<c010ceda>] [<c010b67c>] [<c021a3f1>] [<c01a485f>] [<c013558b>] [<c01363f1>]
[<c012783d>] [<c01278be>]
[<c012793c>] [<c012781c>] [<c01277d0>] [<c0156ced>] [<c01e7374>] [<c0135b05>]
[<c010b5bc>] [<c010002b>]
Warning (Oops_read): Code line not seen, dumping what data is available
/* CPU 1 Call Trace */
Trace; c8824000 <_end+85147b0/8514800>
Trace; c882c000 <[usbcore]__kstrtab_usb_bulk_msg+ca6/cf6>
Trace; c882c8f8 <[usb-uhci]append_qh+0/44>
Trace; c88313a1 <[usb-uhci].data.end+a/4d9>
Trace; c882c428 <[usb-uhci]uhci_show_status+0/234>
Trace; c88313ab <[usb-uhci].data.end+14/4d9>
Trace; c882d948 <[usb-uhci]uhci_clean_iso_step1+0/34>
Trace; c88313bc <[usb-uhci].data.end+25/4d9>
Trace; c882d97c <[usb-uhci]uhci_clean_iso_step2+0/28>
Trace; c88313d1 <[usb-uhci].data.end+3a/4d9>
Trace; c882cb68 <[usb-uhci]insert_qh+0/a4>
Trace; c88313e6 <[usb-uhci].data.end+4f/4d9>
Trace; c882ccec <[usb-uhci]cleanup_skel+0/128>
Trace; c88313f0 <[usb-uhci].data.end+59/4d9>
Trace; c882ca10 <[usb-uhci]unlink_td+0/84>
Trace; c88313fd <[usb-uhci].data.end+66/4d9>
Trace; c882de44 <[usb-uhci]uhci_unlink_urb_async+0/100>
Trace; c8831407 <[usb-uhci].data.end+70/4d9>
Trace; c882e848 <[usb-uhci]uhci_check_timeouts+0/9c>
Trace; c883141d <[usb-uhci].data.end+86/4d9>
Trace; c882e16c <[usb-uhci]uhci_submit_int_urb+0/208>
Trace; c8831431 <[usb-uhci].data.end+9a/4d9>
Trace; c882e990 <[usb-uhci]rh_int_timer_do+0/44>
Trace; c8831445 <[usb-uhci].data.end+ae/4d9>
Trace; c882f114 <[usb-uhci]uhci_map_status+0/70>
Trace; c8831455 <[usb-uhci].data.end+be/4d9>
Trace; c882c720 <[usb-uhci]disable_desc_loop+0/50>
Trace; c8831465 <[usb-uhci].data.end+ce/4d9>
Trace; c882e8e4 <[usb-uhci]rh_send_irq+0/ac>
Trace; c8831477 <[usb-uhci].data.end+e0/4d9>
Trace; c882f4f8 <[usb-uhci]process_interrupt+0/208>
Trace; c8831483 <[usb-uhci].data.end+ec/4d9>
Trace; c882c770 <[usb-uhci]queue_urb_unlocked+0/60>
Trace; c8831495 <[usb-uhci].data.end+fe/4d9>
Trace; c8831350 <[usb-uhci]root_hub_dev_des+0/12>
Trace; c88314a8 <[usb-uhci].data.end+111/4d9>
Trace; c8831870 <[usb-uhci]__module_kernel_version+0/0>
Trace; c88314b9 <[usb-uhci].data.end+122/4d9>
Trace; c882e610 <[usb-uhci]uhci_submit_urb+0/238>
Trace; c88314d4 <[usb-uhci].data.end+13d/4d9>
Trace; c882fb48 <[usb-uhci]reset_hc+0/b8>
Trace; c88314e4 <[usb-uhci].data.end+14d/4d9>
Trace; c8831362 <[usb-uhci]root_hub_config_des+0/19>
Trace; c88314ed <[usb-uhci].data.end+156/4d9>
Trace; c882e9d4 <[usb-uhci]rh_init_int_timer+0/64>
Trace; c8831501 <[usb-uhci].data.end+16a/4d9>
Trace; c882f20c <[usb-uhci]uhci_free_dev+0/34>
Trace; c8831513 <[usb-uhci].data.end+17c/4d9>
Trace; c882fc00 <[usb-uhci]start_hc+0/84>
Trace; c8831521 <[usb-uhci].data.end+18a/4d9>
Trace; c882ea38 <[usb-uhci]rh_submit_urb+0/6a8>
Trace; c883152a <[usb-uhci].data.end+193/4d9>
Trace; c882f25c <[usb-uhci]process_transfer+0/29c>
Trace; c8831538 <[usb-uhci].data.end+1a1/4d9>
Trace; c882f0e0 <[usb-uhci]rh_unlink_urb+0/34>
Trace; c8831549 <[usb-uhci].data.end+1b2/4d9>
Trace; c8830420 <[usb-uhci].rodata.start+0/f26>
Trace; c8831557 <[usb-uhci].data.end+1c0/4d9>
Trace; c88300c4 <[usb-uhci]start_uhci+0/b8>
Trace; c8831578 <[usb-uhci].data.end+1e1/4d9>
Trace; c882cc98 <[usb-uhci]clean_td_chain+0/38>
Trace; c8831583 <[usb-uhci].data.end+1ec/4d9>
Trace; c882c6a8 <[usb-uhci]uhci_switch_timer_int+0/40>
Trace; c8831592 <[usb-uhci].data.end+1fb/4d9>
Trace; c882c93c <[usb-uhci]insert_td+0/78>
Trace; c88315a8 <[usb-uhci].data.end+211/4d9>
Trace; c882c844 <[usb-uhci]alloc_td+0/b4>
Trace; c88315b2 <[usb-uhci].data.end+21b/4d9>
Trace; c882f8b8 <[usb-uhci]process_urb+0/19c>
Trace; c88315bb <[usb-uhci].data.end+224/4d9>
Trace; c883137b <[usb-uhci]root_hub_hub_des+0/9>
Trace; c88315c7 <[usb-uhci].data.end+230/4d9>
Trace; c882e374 <[usb-uhci]uhci_submit_iso_urb+0/224>
Trace; c88315d8 <[usb-uhci].data.end+241/4d9>
Trace; c882fda8 <[usb-uhci]handle_pm_event+0/34>
Trace; c88315ec <[usb-uhci].data.end+255/4d9>
Trace; c882df44 <[usb-uhci]uhci_unlink_urb+0/80>
Trace; c88315fc <[usb-uhci].data.end+265/4d9>
Trace; c882e068 <[usb-uhci]iso_find_start+0/104>
Trace; c883160c <[usb-uhci].data.end+275/4d9>
Trace; c882c6e8 <[usb-uhci]enable_desc_loop+0/38>
Trace; c883161b <[usb-uhci].data.end+284/4d9>
Trace; c882d24c <[usb-uhci]uhci_submit_control_urb+0/2ec>
Trace; c883162c <[usb-uhci].data.end+295/4d9>
Trace; c882fc84 <[usb-uhci]uhci_cleanup_dev+0/c4>
Trace; c8831644 <[usb-uhci].data.end+2ad/4d9>
Trace; c882ca94 <[usb-uhci]delete_desc+0/18>
Trace; c8831655 <[usb-uhci].data.end+2be/4d9>
Trace; c882d538 <[usb-uhci]uhci_submit_bulk_urb+0/410>
Trace; c8831661 <[usb-uhci].data.end+2ca/4d9>
Trace; c882fddc <[usb-uhci]alloc_uhci+0/2e8>
Trace; c8831676 <[usb-uhci].data.end+2df/4d9>
Trace; c8831348 <[usb-uhci]devs+0/0>
Trace; c8831681 <[usb-uhci].data.end+2ea/4d9>
Trace; c882cc0c <[usb-uhci]unlink_qh+0/3c>
Trace; c883169e <[usb-uhci].data.end+307/4d9>
Trace; c883134c <[usb-uhci]uhci_devices+0/4>
Trace; c88316a8 <[usb-uhci].data.end+311/4d9>
Trace; c882c050 <[usb-uhci]uhci_show_qh+0/a8>
Trace; c88316b5 <[usb-uhci].data.end+31e/4d9>
Trace; c882db78 <[usb-uhci]uhci_unlink_urb_sync+0/180>
Trace; c88316d5 <[usb-uhci].data.end+33e/4d9>
Trace; c882cc48 <[usb-uhci]delete_qh+0/50>
Trace; c88316ea <[usb-uhci].data.end+353/4d9>
Trace; c882fa54 <[usb-uhci]uhci_interrupt+0/f4>
Trace; c88316f4 <[usb-uhci].data.end+35d/4d9>
Trace; c882f184 <[usb-uhci]uhci_alloc_dev+0/4>
Trace; c8831703 <[usb-uhci].data.end+36c/4d9>
Trace; c882e598 <[usb-uhci]search_dev_ep+0/78>
Trace; c8831712 <[usb-uhci].data.end+37b/4d9>
Trace; c882f240 <[usb-uhci]uhci_get_current_frame_number+0/1c>
Trace; c8831720 <[usb-uhci].data.end+389/4d9>
Trace; c882ccd0 <[usb-uhci]fill_td+0/1c>
Trace; c883173e <[usb-uhci].data.end+3a7/4d9>
Trace; c882d9a4 <[usb-uhci]uhci_clean_transfer+0/1d4>
Trace; c8831746 <[usb-uhci].data.end+3af/4d9>
Trace; c882c000 <[usbcore]__kstrtab_usb_bulk_msg+ca6/cf6>
Trace; c883175a <[usb-uhci].data.end+3c3/4d9>
Trace; c882c65c <[usb-uhci]clean_descs+0/4c>
Trace; c88317a7 <[usb-uhci].data.end+410/4d9>
Trace; c882f700 <[usb-uhci]process_iso+0/1b8>
Trace; c88317b3 <[usb-uhci].data.end+41c/4d9>
Trace; c882f188 <[usb-uhci]uhci_unlink_urbs+0/84>
Trace; c88317bf <[usb-uhci].data.end+428/4d9>
Trace; c882ce14 <[usb-uhci]init_skel+0/438>
Trace; c88317d0 <[usb-uhci].data.end+439/4d9>
Trace; c882dfc4 <[usb-uhci]find_iso_limits+0/a4>
Trace; c88317da <[usb-uhci].data.end+443/4d9>
Trace; c882c7d0 <[usb-uhci]queue_urb+0/2c>
Trace; c88317ea <[usb-uhci].data.end+453/4d9>
Trace; c882dcf8 <[usb-uhci]uhci_cleanup_unlink+0/14c>
Trace; c88317f4 <[usb-uhci].data.end+45d/4d9>
Trace; c883017c <[usb-uhci]uhci_init+0/f0>
Trace; c8831808 <[usb-uhci].data.end+471/4d9>
Trace; c882caac <[usb-uhci]alloc_qh+0/bc>
Trace; c8831812 <[usb-uhci].data.end+47b/4d9>
Trace; c883026c <[usb-uhci]uhci_cleanup+0/60>
Trace; c883181b <[usb-uhci].data.end+484/4d9>
Trace; c882c9b4 <[usb-uhci]insert_td_horizontal+0/5c>
Trace; c8831828 <[usb-uhci].data.end+491/4d9>
Trace; c882c7fc <[usb-uhci]dequeue_urb+0/48>
Trace; c883183d <[usb-uhci].data.end+4a6/4d9>
Trace; c882fd48 <[usb-uhci]uhci_start_usb+0/60>
Trace; c8831849 <[usb-uhci].data.end+4b2/4d9>
Trace; c8831384 <[usb-uhci]uhci_device_operations+0/13>
Trace; c8831858 <[usb-uhci].data.end+4c1/4d9>
Trace; d5e85074 <END_OF_CODE+d649c63/????>
Trace; dde8c883 <END_OF_CODE+15651472/????>
Trace; ff4403e8 <END_OF_CODE+36c04fd7/????>
Trace; f8892824 <END_OF_CODE+30057413/????>
Trace; e8503024 <END_OF_CODE+1fcc7c13/????>
Trace; f78fe8dc <END_OF_CODE+2f0c34cb/????>
Trace; f68921eb <END_OF_CODE+2e056dda/????>
Trace; e8570789 <END_OF_CODE+1fd35378/????>
Trace; e5e85717 <END_OF_CODE+1d64a306/????>
Trace; eb04c483 <END_OF_CODE+22811072/????>
Trace; c9315657 <END_OF_CODE+ada246/????>
Trace; d8291704 <END_OF_CODE+fa562f3/????>
Trace; e8c0288a <END_OF_CODE+203c7479/????>
Trace; f78f0458 <END_OF_CODE+2f0b5047/????>
Trace; e8560d6a <END_OF_CODE+1fd25959/????>
Trace; f79af318 <END_OF_CODE+2f173f07/????>
Trace; f689c30c <END_OF_CODE+2e060efb/????>
Trace; c8831870 <[usb-uhci]__module_kernel_version+0/0>
Trace; c8831140 <[usb-uhci].rodata.start+d20/f26>
Trace; c8831187 <[usb-uhci].rodata.start+d67/f26>
Trace; eb04c483 <END_OF_CODE+22811072/????>
Trace; e8c88312 <END_OF_CODE+2044cf01/????>
Trace; f78ea008 <END_OF_CODE+2f0aebf7/????>
Trace; eb08c483 <END_OF_CODE+22851072/????>
Trace; e8c88312 <END_OF_CODE+2044cf01/????>
Trace; f78e9fc8 <END_OF_CODE+2f0aebb7/????>
Trace; e85308eb <END_OF_CODE+1fcf54da/????>
Trace; e8000c03 <END_OF_CODE+1f7c57f2/????>
Trace; f79aeb30 <END_OF_CODE+2f17371f/????>
Trace; f68913eb <END_OF_CODE+2e055fda/????>
Trace; c8831348 <[usb-uhci]devs+0/0>
Trace; fa06e852 <END_OF_CODE+31833441/????>
Trace; c8831870 <[usb-uhci]__module_kernel_version+0/0>
Trace; d876e850 <END_OF_CODE+ff3343f/????>
Trace; f689c304 <END_OF_CODE+2e060ef3/????>
Trace; fffeabe8 <END_OF_CODE+377af7d7/????>
Trace; f689c3ff <END_OF_CODE+2e060fee/????>
Trace; f3007c7a <END_OF_CODE+2a7cc869/????>
Trace; e9f87e90 <END_OF_CODE+2174ca7f/????>
Trace; f87e90f3 <END_OF_CODE+2ffadce2/????>
Trace; ffc4dce9 <END_OF_CODE+374128d8/????>
Trace; f57e90f3 <END_OF_CODE+2cfadce2/????>
Trace; ffc5fce9 <END_OF_CODE+374248d8/????>
Trace; f57e90f3 <END_OF_CODE+2cfadce2/????>
Trace; ffc62ee9 <END_OF_CODE+37427ad8/????>
Trace; f57e90f3 <END_OF_CODE+2cfadce2/????>
Trace; ffc698e9 <END_OF_CODE+3742e4d8/????>
Trace; f57e90f3 <END_OF_CODE+2cfadce2/????>
Trace; ffc6dfe9 <END_OF_CODE+37432bd8/????>
Trace; f3007c7f <END_OF_CODE+2a7cc86e/????>
Trace; e9f87e90 <END_OF_CODE+2174ca7f/????>
Trace; f87e90f3 <END_OF_CODE+2ffadce2/????>
Trace; ffd802e9 <END_OF_CODE+37544ed8/????>
Trace; d8c7e9f8 <END_OF_CODE+104435e7/????>
Trace; f300247e <END_OF_CODE+2a7c706d/????>
Trace; e9f87e90 <END_OF_CODE+2174ca7f/????>
Trace; f87e90f3 <END_OF_CODE+2ffadce2/????>
Trace; ffdc32e9 <END_OF_CODE+37587ed8/????>
Trace; e2a9e9f8 <END_OF_CODE+1a2635e7/????>
Trace; f300247e <END_OF_CODE+2a7c706d/????>
Trace; e9f87e90 <END_OF_CODE+2174ca7f/????>
Trace; f87e90f3 <END_OF_CODE+2ffadce2/????>
Trace; fff1cbe9 <END_OF_CODE+376e17d8/????>
Trace; f63ae9f8 <END_OF_CODE+2db735e7/????>
Trace; c882ecd6 <[usb-uhci]rh_submit_urb+29e/6a8>
Trace; c882ecf8 <[usb-uhci]rh_submit_urb+2c0/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882ecf1 <[usb-uhci]rh_submit_urb+2b9/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882f0bb <[usb-uhci]rh_submit_urb+683/6a8>
Trace; c882ed18 <[usb-uhci]rh_submit_urb+2e0/6a8>
Trace; c882ed40 <[usb-uhci]rh_submit_urb+308/6a8>
Trace; c882ecf1 <[usb-uhci]rh_submit_urb+2b9/6a8>
Trace; c882ecf1 <[usb-uhci]rh_submit_urb+2b9/6a8>
Trace; c882ed62 <[usb-uhci]rh_submit_urb+32a/6a8>
/* CPU 0 Call Trace */
Trace; c0222053 <stext_lock+841b/8e2c>
Trace; c010cafd <__global_cli+8d/12c>
Trace; c0222068 <stext_lock+8430/8e2c>
Trace; c018341f <flush_to_ldisc+93/114>
Trace; c0189e45 <console_softint+55/11c>
Trace; c011ff47 <tasklet_action+4f/7c>
Trace; c011fe6a <do_softirq+5a/88>
Trace; c010ceda <do_IRQ+da/ec>
Trace; c010b67c <ret_from_intr+0/20>
Trace; c021a3f1 <stext_lock+7b9/8e2c>
Trace; c01a485f <do_ide_request+f/14>
Trace; c013558b <__wait_on_buffer+18b/280>
Trace; c01363f1 <end_buffer_io_sync+31/34>
Trace; c012783d <waitfor_one_page+21/40>
Trace; c01278be <do_buffer_fdatasync+62/b4>
Trace; c012793c <generic_buffer_fdatasync+2c/38>
Trace; c012781c <waitfor_one_page+0/40>
Trace; c01277d0 <writeout_one_page+0/4c>
Trace; c0156ced <ext2_sync_file+55/108>
Trace; c01e7374 <sys_socketcall+13c/1dc>
Trace; c0135b05 <sys_fsync+f5/174>
Trace; c010b5bc <system_call+34/38>
Trace; c010002b <startup_32+2b/c7>
2 warnings issued. Results may not be reliable.
May 18 10:55:07 hilbert syslogd 1.3-3: restart.
May 18 10:55:08 hilbert syslog: syslogd startup succeeded
May 18 10:55:08 hilbert kernel: klogd 1.3-3, log source = /proc/kmsg started.
May 18 10:55:08 hilbert kernel: Inspecting /boot/System.map
May 18 10:55:08 hilbert syslog: klogd startup succeeded
May 18 10:55:08 hilbert identd[373]: started
May 18 10:55:08 hilbert identd: identd startup succeeded
May 18 10:55:08 hilbert kernel: Loaded 13438 symbols from /boot/System.map.
May 18 10:55:08 hilbert kernel: Symbols match kernel version 2.3.99.
May 18 10:55:08 hilbert kernel: No module symbols loaded.
May 18 10:55:08 hilbert kernel: Linux version 2.3.99-pre9 (root@hilbert) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Wed May 17 21:52:57 CDT 2000
May 18 10:55:08 hilbert kernel: BIOS-provided physical RAM map:
May 18 10:55:08 hilbert kernel: e820: 000000000009fc00 @ 0000000000000000 (usable)
May 18 10:55:08 hilbert kernel: e820: 0000000000000400 @ 000000000009fc00 (reserved)
May 18 10:55:08 hilbert kernel: e820: 0000000000010000 @ 00000000000f0000 (reserved)
May 18 10:55:08 hilbert kernel: e820: 0000000007efd000 @ 0000000000100000 (usable)
May 18 10:55:08 hilbert kernel: e820: 0000000000002000 @ 0000000007ffd000 (ACPI data)
May 18 10:55:08 hilbert kernel: e820: 0000000000001000 @ 0000000007fff000 (ACPI NVS)
May 18 10:55:08 hilbert kernel: e820: 0000000000001000 @ 00000000fec00000 (reserved)
May 18 10:55:08 hilbert kernel: e820: 0000000000001000 @ 00000000fee00000 (reserved)
May 18 10:55:08 hilbert kernel: e820: 0000000000010000 @ 00000000ffff0000 (reserved)
May 18 10:55:08 hilbert kernel: Scan SMP from c0000000 for 1024 bytes.
May 18 10:55:08 hilbert kernel: Scan SMP from c009fc00 for 1024 bytes.
May 18 10:55:08 hilbert kernel: Scan SMP from c00f0000 for 65536 bytes.
May 18 10:55:08 hilbert kernel: found SMP MP-table at 000f6e50
May 18 10:55:08 hilbert kernel: hm, page 000f6000 reserved twice.
May 18 10:55:08 hilbert kernel: hm, page 000f7000 reserved twice.
May 18 10:55:08 hilbert kernel: hm, page 000f6000 reserved twice.
May 18 10:55:08 hilbert kernel: hm, page 000f7000 reserved twice.
May 18 10:55:08 hilbert kernel: On node 0 totalpages: 32765
May 18 10:55:08 hilbert kernel: zone(0): 4096 pages.
May 18 10:55:08 hilbert kernel: zone(1): 28669 pages.
May 18 10:55:08 hilbert kernel: zone(2): 0 pages.
May 18 10:55:08 hilbert kernel: Intel MultiProcessor Specification v1.1
May 18 10:55:08 hilbert kernel: Virtual Wire compatibility mode.
May 18 10:55:08 hilbert kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at:
0xFEE00000
May 18 10:55:08 hilbert kernel: Processor #1 Pentium(tm) Pro APIC version 17
May 18 10:55:08 hilbert kernel: Floating point unit present.
May 18 10:55:08 hilbert kernel: Machine Exception supported.
May 18 10:55:08 hilbert kernel: 64 bit compare & exchange supported.
May 18 10:55:08 hilbert kernel: Internal APIC present.
May 18 10:55:08 hilbert kernel: Bootup CPU
May 18 10:55:08 hilbert kernel: Processor #0 Pentium(tm) Pro APIC version 17
May 18 10:55:08 hilbert kernel: Floating point unit present.
May 18 10:55:08 hilbert kernel: Machine Exception supported.
May 18 10:55:08 hilbert kernel: 64 bit compare & exchange supported.
May 18 10:55:08 hilbert atd: atd startup succeeded
May 18 10:55:08 hilbert kernel: Internal APIC present.
May 18 10:55:08 hilbert kernel: Bus #0 is PCI
May 18 10:55:08 hilbert kernel: Bus #1 is PCI
May 18 10:55:08 hilbert kernel: Bus #2 is ISA
May 18 10:55:08 hilbert kernel: I/O APIC #2 Version 17 at 0xFEC00000.
May 18 10:55:08 hilbert kernel: Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2,
APIC INT 00
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2,
APIC INT 01
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2,
APIC INT 02
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2,
APIC INT 03
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2,
APIC INT 04
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2,
APIC INT 05
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2,
APIC INT 06
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2,
APIC INT 07
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 08, APIC ID 2,
APIC INT 08
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2,
APIC INT 09
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2,
APIC INT 0c
May 18 10:55:08 hilbert kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2,
APIC INT 0e
May 18 10:55:08 hilbert kernel: Int: type 0, pol 3, trig 3, bus 2, IRQ 0b, APIC ID 2,
APIC INT 10
May 18 10:55:08 hilbert kernel: Int: type 0, pol 3, trig 3, bus 2, IRQ 0a, APIC ID 2,
APIC INT 12
May 18 10:55:08 hilbert kernel: Int: type 0, pol 3, trig 3, bus 2, IRQ 0f, APIC ID 2,
APIC INT 13
May 18 10:55:08 hilbert kernel: Lint: type 3, pol 1, trig 1, bus 2, IRQ 00, APIC ID
ff, APIC LINT 00
May 18 10:55:08 hilbert kernel: Lint: type 1, pol 1, trig 1, bus 2, IRQ 00, APIC ID
ff, APIC LINT 01
May 18 10:55:08 hilbert kernel: Processors: 2
May 18 10:55:08 hilbert kernel: mapped APIC to ffffe000 (fee00000)
May 18 10:55:08 hilbert kernel: mapped IOAPIC to ffffd000 (fec00000)
May 18 10:55:08 hilbert kernel: Initializing CPU#0
May 18 10:55:08 hilbert kernel: Detected 400914455 Hz processor.
May 18 10:55:08 hilbert kernel: Console: colour VGA+ 80x25
May 18 10:55:08 hilbert kernel: Calibrating delay loop... 799.54 BogoMIPS
May 18 10:55:08 hilbert kernel: Memory: 126212k/131060k available (1524k kernel code,
4460k reserved, 140k data, 216k init, 0k highmem)
May 18 10:55:08 hilbert kernel: Dentry-cache hash table entries: 16384 (order: 5,
131072 bytes)
May 18 10:55:08 hilbert kernel: Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)
May 18 10:55:08 hilbert kernel: Page-cache hash table entries: 32768 (order: 5, 131072
bytes)
May 18 10:55:08 hilbert kernel: kmem_create: Poisoning requested, but con given -
bdev_cache
May 18 10:55:08 hilbert kernel: Inode-cache hash table entries: 8192 (order: 4, 65536
bytes)
May 18 10:55:08 hilbert kernel: kmem_create: Poisoning requested, but con given -
inode_cache
May 18 10:55:08 hilbert kernel: Checking 386/387 coupling... OK, FPU using exception
16 error reporting.
May 18 10:55:08 hilbert kernel: Checking 'hlt' instruction... OK.
May 18 10:55:08 hilbert kernel: POSIX conformance testing by UNIFIX
May 18 10:55:08 hilbert kernel: mtrr: v1.36 (20000221) Richard Gooch
([EMAIL PROTECTED])
May 18 10:55:08 hilbert kernel: CPU0: Intel Pentium II (Deschutes) stepping 01
May 18 10:55:08 hilbert kernel: per-CPU timeslice cutoff: 1430.55 usecs.
May 18 10:55:08 hilbert kernel: Getting VERSION: 40011
May 18 10:55:08 hilbert kernel: Getting VERSION: 40011
May 18 10:55:08 hilbert kernel: Getting LVT0: 8700
May 18 10:55:08 hilbert kernel: Getting LVT1: 400
May 18 10:55:08 hilbert kernel: enabled ExtINT on CPU#0
May 18 10:55:08 hilbert kernel: ESR value before enabling vector: 00000000
May 18 10:55:08 hilbert kernel: ESR value after enabling vector: 00000000
May 18 10:55:08 hilbert kernel: CPU present map: 3
May 18 10:55:08 hilbert kernel: Booting processor 1/0 eip 2000
May 18 10:55:08 hilbert kernel: Setting warm reset code and vector.
May 18 10:55:08 hilbert kernel: 1.
May 18 10:55:08 hilbert kernel: 2.
May 18 10:55:08 hilbert kernel: 3.
May 18 10:55:08 hilbert kernel: Asserting INIT.
May 18 10:55:08 hilbert kernel: Waiting for send to finish...
May 18 10:55:08 hilbert kernel: +Deasserting INIT.
May 18 10:55:08 hilbert kernel: Waiting for send to finish...
May 18 10:55:08 hilbert kernel: +#startup loops: 2.
May 18 10:55:08 hilbert kernel: Sending STARTUP #1.
May 18 10:55:08 hilbert kernel: After apic_write.
May 18 10:55:08 hilbert kernel: Startup point 1.
May 18 10:55:08 hilbert kernel: Initializing CPU#1
May 18 10:55:08 hilbert kernel: Waiting for send to finish...
May 18 10:55:08 hilbert kernel: CPU#1 (phys ID: 0) waiting for CALLOUT
May 18 10:55:08 hilbert kernel: +Sending STARTUP #2.
May 18 10:55:08 hilbert kernel: After apic_write.
May 18 10:55:08 hilbert kernel: Startup point 1.
May 18 10:55:08 hilbert kernel: Waiting for send to finish...
May 18 10:55:08 hilbert kernel: +After Startup.
May 18 10:55:08 hilbert kernel: Before Callout 1.
May 18 10:55:08 hilbert kernel: After Callout 1.
May 18 10:55:08 hilbert kernel: CALLIN, before setup_local_APIC().
May 18 10:55:08 hilbert kernel: masked ExtINT on CPU#1
May 18 10:55:08 hilbert kernel: ESR value before enabling vector: 00000000
May 18 10:55:08 hilbert kernel: ESR value after enabling vector: 00000000
May 18 10:55:08 hilbert kernel: Calibrating delay loop... 801.18 BogoMIPS
May 18 10:55:08 hilbert kernel: Stack at about c124ffbc
May 18 10:55:08 hilbert kernel: OK.
May 18 10:55:08 hilbert kernel: CPU1: Intel Pentium II (Deschutes) stepping 01
May 18 10:55:08 hilbert kernel: CPU has booted.
May 18 10:55:08 hilbert kernel: Before bogomips.
May 18 10:55:08 hilbert kernel: Total of 2 processors activated (1600.72 BogoMIPS).
May 18 10:55:08 hilbert kernel: Before bogocount - setting activated=1.
May 18 10:55:08 hilbert kernel: Boot done.
May 18 10:55:08 hilbert kernel: ENABLING IO-APIC IRQs
May 18 10:55:08 hilbert kernel: ...changing IO-APIC physical APIC ID to 2 ... ok.
May 18 10:55:08 hilbert kernel: Synchronizing Arb IDs.
May 18 10:55:08 hilbert kernel: init IO_APIC IRQs
May 18 10:55:08 hilbert kernel: IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-13, 2-15,
2-17, 2-20, 2-21, 2-22, 2-23 not connected.
May 18 10:55:08 hilbert kernel: ..TIMER: vector=49 pin1=2 pin2=0
May 18 10:55:08 hilbert kernel: activating NMI Watchdog ... done.
May 18 10:55:08 hilbert kernel: number of MP IRQ sources: 15.
May 18 10:55:08 hilbert kernel: number of IO-APIC #2 registers: 24.
May 18 10:55:08 hilbert kernel: testing the IO APIC.......................
May 18 10:55:08 hilbert kernel:
May 18 10:55:08 hilbert kernel: IO APIC #2......
May 18 10:55:08 hilbert kernel: .... register #00: 02000000
May 18 10:55:08 hilbert kernel: ....... : physical APIC id: 02
May 18 10:55:08 hilbert kernel: .... register #01: 00170011
May 18 10:55:08 hilbert kernel: ....... : max redirection entries: 0017
May 18 10:55:08 hilbert kernel: ....... : IO APIC version: 0011
May 18 10:55:08 hilbert kernel: .... register #02: 00000000
May 18 10:55:08 hilbert kernel: ....... : arbitration: 00
May 18 10:55:08 hilbert kernel: .... IRQ redirection table:
May 18 10:55:08 hilbert kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
May 18 10:55:08 hilbert kernel: 00 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: 01 003 03 0 0 0 0 0 1 1 39
May 18 10:55:08 hilbert kernel: 02 003 03 0 0 0 0 0 1 1 31
May 18 10:55:08 hilbert kernel: 03 003 03 0 0 0 0 0 1 1 41
May 18 10:55:08 hilbert kernel: 04 003 03 0 0 0 0 0 1 1 49
May 18 10:55:08 hilbert kernel: 05 003 03 0 0 0 0 0 1 1 51
May 18 10:55:08 hilbert kernel: 06 003 03 0 0 0 0 0 1 1 59
May 18 10:55:08 hilbert kernel: 07 003 03 0 0 0 0 0 1 1 61
May 18 10:55:08 hilbert kernel: 08 003 03 0 0 0 0 0 1 1 69
May 18 10:55:08 hilbert kernel: 09 003 03 0 0 0 0 0 1 1 71
May 18 10:55:08 hilbert kernel: 0a 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: 0b 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: 0c 003 03 0 0 0 0 0 1 1 79
May 18 10:55:08 hilbert kernel: 0d 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: 0e 003 03 0 0 0 0 0 1 1 81
May 18 10:55:08 hilbert kernel: 0f 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: 10 003 03 1 1 0 1 0 1 1 89
May 18 10:55:08 hilbert kernel: 11 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: 12 003 03 1 1 0 1 0 1 1 91
May 18 10:55:08 hilbert kernel: 13 003 03 1 1 0 1 0 1 1 99
May 18 10:55:08 hilbert kernel: 14 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: 15 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: 16 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: 17 000 00 1 0 0 0 0 0 0 00
May 18 10:55:08 hilbert kernel: IRQ to pin mappings:
May 18 10:55:08 hilbert kernel: IRQ0 -> 2
May 18 10:55:08 hilbert kernel: IRQ1 -> 1
May 18 10:55:08 hilbert kernel: IRQ3 -> 3
May 18 10:55:08 hilbert kernel: IRQ4 -> 4
May 18 10:55:08 hilbert kernel: IRQ5 -> 5
May 18 10:55:08 hilbert kernel: IRQ6 -> 6
May 18 10:55:08 hilbert kernel: IRQ7 -> 7
May 18 10:55:08 hilbert kernel: IRQ8 -> 8
May 18 10:55:08 hilbert kernel: IRQ9 -> 9
May 18 10:55:08 hilbert kernel: IRQ10 -> 18
May 18 10:55:08 hilbert kernel: IRQ11 -> 16
May 18 10:55:08 hilbert kernel: IRQ12 -> 12
May 18 10:55:08 hilbert kernel: IRQ14 -> 14
May 18 10:55:08 hilbert kernel: IRQ15 -> 19
May 18 10:55:08 hilbert kernel: .................................... done.
May 18 10:55:08 hilbert kernel: calibrating APIC timer ...
May 18 10:55:08 hilbert kernel: ..... CPU clock speed is 400.9100 MHz.
May 18 10:55:08 hilbert kernel: ..... host bus clock speed is 100.2273 MHz.
May 18 10:55:08 hilbert kernel: cpu: 0, clocks: 1002273, slice: 334091
May 18 10:55:08 hilbert kernel: CPU0<C0:1002272,C:668176,D:5,S:334091,C:1002273>
May 18 10:55:08 hilbert kernel: cpu: 1, clocks: 1002273, slice: 334091
May 18 10:55:08 hilbert kernel: CPU1<C0:1002272,C:334080,D:10,S:334091,C:1002273>
May 18 10:55:08 hilbert kernel: checking TSC synchronization across CPUs: passed.
May 18 10:55:08 hilbert kernel: Setting commenced=1, go go go
May 18 10:55:08 hilbert kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0730, last
bus=1
May 18 10:55:08 hilbert kernel: PCI: Using configuration type 1
May 18 10:55:08 hilbert kernel: PCI: Probing PCI hardware
May 18 10:55:08 hilbert kernel: PCI: Using IRQ router PIIX [8086/122e] at 00:04.0
May 18 10:55:08 hilbert kernel: Limiting direct PCI/PCI transfers.
May 18 10:55:08 hilbert kernel: isapnp: Scanning for Pnp cards...
May 18 10:55:08 hilbert kernel: isapnp: No Plug & Play device found
May 18 10:55:08 hilbert kernel: Linux NET4.0 for Linux 2.3
May 18 10:55:08 hilbert kernel: Based upon Swansea University Computer Society
NET3.039
May 18 10:55:08 hilbert kernel: kmem_create: Poisoning requested, but con given -
skbuff_head_cache
May 18 10:55:08 hilbert kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
May 18 10:55:08 hilbert kernel: NET4: Linux TCP/IP 1.0 for NET4.0
May 18 10:55:08 hilbert kernel: IP Protocols: ICMP, UDP, TCP
May 18 10:55:08 hilbert kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
May 18 10:55:08 hilbert kernel: TCP: Hash tables configured (established 8192 bind
8192)
May 18 10:55:08 hilbert kernel: Starting kswapd v1.6
May 18 10:55:08 hilbert kernel: pty: 256 Unix98 ptys configured
May 18 10:55:08 hilbert kernel: Uniform Multi-Platform E-IDE driver Revision: 6.30
May 18 10:55:08 hilbert kernel: ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
May 18 10:55:08 hilbert kernel: PIIX4: IDE controller on PCI bus 00 dev 21
May 18 10:55:08 hilbert kernel: PIIX4: chipset revision 1
May 18 10:55:08 hilbert kernel: PIIX4: not 100% native mode: will probe irqs later
May 18 10:55:08 hilbert kernel: ide0: BM-DMA at 0xb800-0xb807, BIOS settings:
hda:DMA, hdb:pio
May 18 10:55:08 hilbert kernel: hda: Maxtor 52049U4, ATA DISK drive
May 18 10:55:08 hilbert kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 18 10:55:08 hilbert kernel: hda: 40020624 sectors (20491 MB) w/2048KiB Cache,
CHS=39703/16/63, UDMA(33)
May 18 10:55:08 hilbert kernel: Partition check:
May 18 10:55:08 hilbert kernel: hda: hda1 hda2 < hda5 hda6 hda7 >
May 18 10:55:08 hilbert kernel: Floppy drive(s): fd0 is 1.44M
May 18 10:55:08 hilbert kernel: FDC 0 is a post-1991 82077
May 18 10:55:08 hilbert kernel: (scsi0) <Adaptec AHA-294X Ultra2 SCSI host adapter>
found at PCI 0/12/0
May 18 10:55:08 hilbert kernel: (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
May 18 10:55:08 hilbert kernel: (scsi0) Downloading sequencer code... 392 instructions
downloaded
May 18 10:55:08 hilbert kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast
SCSI) 5.2.0/3.2.4
May 18 10:55:08 hilbert kernel: <Adaptec AHA-294X Ultra2 SCSI host adapter>
May 18 10:55:08 hilbert kernel: scsi : 1 host.
May 18 10:55:08 hilbert kernel: (scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset
15.
May 18 10:55:08 hilbert kernel: Vendor: IBM Model: DDRS-34560D Rev: DC1B
May 18 10:55:08 hilbert kernel: Type: Direct-Access ANSI SCSI
revision: 02
May 18 10:55:08 hilbert kernel: Detected scsi disk sda at scsi0, channel 0, id 1, lun
0
May 18 10:55:08 hilbert kernel: (scsi0:0:5:0) Synchronous at 20.0 Mbyte/sec, offset
15.
May 18 10:55:08 hilbert kernel: Vendor: PLEXTOR Model: CD-ROM PX-32CS Rev: 1.02
May 18 10:55:08 hilbert kernel: Type: CD-ROM ANSI SCSI
revision: 02
May 18 10:55:08 hilbert kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5,
lun 0
May 18 10:55:08 hilbert kernel: scsi : detected 1 SCSI cdrom 1 SCSI disk total.
May 18 10:55:08 hilbert kernel: Uniform CD-ROM driver Revision: 3.08
May 18 10:55:08 hilbert kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors=
8925000 [4357 MB] [4.4 GB]
May 18 10:55:08 hilbert kernel: sda: sda2 sda3 sda4
May 18 10:55:08 hilbert kernel: eth0: DE500-BA at 0xb000 (PCI bus 0, device 10), h/w
address 08:00:2b:c4:55:8d,
May 18 10:55:08 hilbert kernel: and requires IRQ10 (provided by PCI BIOS).
May 18 10:55:08 hilbert kernel: de4x5.c:V0.545 1999/11/28 [EMAIL PROTECTED]
May 18 10:55:08 hilbert kernel: NTFS version 000502
May 18 10:55:08 hilbert kernel: Serial driver version 4.93 (2000-03-20) with
MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
May 18 10:55:08 hilbert kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
May 18 10:55:08 hilbert kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
May 18 10:55:08 hilbert kernel: VFS: Mounted root (ext2 filesystem) readonly.
May 18 10:55:08 hilbert kernel: Freeing unused kernel memory: 216k freed
May 18 10:55:08 hilbert kernel: Adding Swap: 262544k swap-space (priority -1)
May 18 10:55:08 hilbert crond: crond startup succeeded
May 18 10:55:09 hilbert inet: inetd startup succeeded
May 18 10:55:09 hilbert lpd[433]: restarted
May 18 10:55:09 hilbert lpd: lpd startup succeeded
May 18 10:55:09 hilbert keytable: Loading keymap:
May 18 10:55:09 hilbert keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
May 18 10:55:09 hilbert keytable: Loading system font:
May 18 10:55:09 hilbert rc: Starting keytable succeeded
May 18 10:55:09 hilbert kernel: eth0: media is 100Mb/s.
May 18 10:55:10 hilbert xfs: xfs startup succeeded
May 18 10:55:10 hilbert xfs: Warning: The directory
"/usr/share/fonts/default/TrueType" does not exist.
May 18 10:55:10 hilbert xfs: Entry deleted from font path.
May 18 10:55:10 hilbert linuxconf: Linuxconf final setup
May 18 10:55:11 hilbert rc: Starting linuxconf succeeded
May 18 10:55:11 hilbert sshd[556]: log: Server listening on port 22.
May 18 10:55:11 hilbert sshd[556]: log: Generating 768 bit RSA key.
May 18 10:55:12 hilbert sshd[556]: log: RSA key generation complete.
May 18 10:55:19 hilbert PAM_pwdb[569]: (login) session opened for user borchers by
LOGIN(uid=0)
May 18 10:59:25 hilbert PAM_pwdb[939]: (su) session opened for user root by
borchers(uid=500)
May 18 10:59:34 hilbert kernel: usb.c: registered new driver hub
May 18 10:59:34 hilbert kernel: usb-uhci.c: $Revision: 1.231 $ time 00:14:38 May 18
2000
May 18 10:59:34 hilbert kernel: usb-uhci.c: High bandwidth mode enabled
May 18 10:59:34 hilbert kernel: usb-uhci.c: Intel USB controller: setting latency
timer to 0
May 18 10:59:34 hilbert kernel: usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 15
May 18 10:59:34 hilbert kernel: usb-uhci.c: Detected 2 ports
May 18 10:59:34 hilbert kernel: usb.c: new USB bus registered, assigned bus number 1
May 18 10:59:34 hilbert kernel: usb.c: USB new device connect, assigned device number
1
May 18 10:59:34 hilbert kernel: usb.c: kmalloc IF c23b7f40, numif 1
May 18 10:59:34 hilbert kernel: usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
May 18 10:59:34 hilbert kernel: usb.c: USB device number 1 default language ID 0x0
May 18 10:59:34 hilbert kernel: Product: USB UHCI Root Hub
May 18 10:59:34 hilbert kernel: SerialNumber: b400
May 18 10:59:34 hilbert kernel: hub.c: USB hub found
May 18 10:59:34 hilbert kernel: hub.c: 2 ports detected
May 18 10:59:34 hilbert kernel: hub.c: ganged power switching
May 18 10:59:34 hilbert kernel: hub.c: standalone hub
May 18 10:59:34 hilbert kernel: hub.c: global over-current protection
May 18 10:59:34 hilbert kernel: hub.c: power on to power good time: 2ms
May 18 10:59:34 hilbert kernel: hub.c: hub controller current requirement: 0mA
May 18 10:59:34 hilbert kernel: hub.c: port 1 is removable
May 18 10:59:34 hilbert kernel: hub.c: port 2 is removable
May 18 10:59:34 hilbert kernel: hub.c: local power source is good
May 18 10:59:34 hilbert kernel: hub.c: no over-current condition exists
May 18 10:59:34 hilbert kernel: hub.c: enabling power on all ports
May 18 10:59:34 hilbert kernel: usb.c: hub driver claimed interface c23b7f40
May 18 10:59:34 hilbert kernel: usbserial.c: USB Serial support registered for Keyspan
PDA
May 18 10:59:34 hilbert kernel: usbserial.c: USB Serial support registered for Digi
USB
May 18 10:59:34 hilbert kernel: usb.c: registered new driver serial
May 18 10:59:34 hilbert kernel: hub.c: port 1 connection change
May 18 10:59:34 hilbert kernel: hub.c: portstatus 101, change 1, High Speed
May 18 10:59:34 hilbert kernel: hub.c: portstatus 103, change 0, High Speed
May 18 10:59:34 hilbert kernel: usb.c: USB new device connect, assigned device number
2
May 18 10:59:34 hilbert kernel: usb.c: kmalloc IF c56db020, numif 1
May 18 10:59:34 hilbert kernel: usb.c: new device strings: Mfr=2, Product=1,
SerialNumber=0
May 18 10:59:35 hilbert kernel: usb.c: USB device number 2 default language ID 0x409
May 18 10:59:35 hilbert kernel: Manufacturer: Digi International
May 18 10:59:35 hilbert kernel: Product: AccelePort(R) USB 4
May 18 10:59:35 hilbert kernel: usbserial.c: Looking at Keyspan PDA -
(prerenumeration) Vendor id=06cd Product id=0103
May 18 10:59:35 hilbert kernel: usbserial.c: Looking at Keyspan PDA Vendor id=06cd
Product id=0104
May 18 10:59:35 hilbert kernel: usbserial.c: Looking at Digi USB Vendor id=05c5
Product id=0004
May 18 10:59:35 hilbert kernel: usbserial.c: descriptor matches
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk in
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk out
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk in
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk out
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk in
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk out
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk in
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk out
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk in
May 18 10:59:35 hilbert kernel: usbserial.c: found bulk out
May 18 10:59:35 hilbert kernel: usbserial.c: Digi USB converter detected
May 18 10:59:35 hilbert kernel: usbserial.c: get_free_serial 4
May 18 10:59:35 hilbert kernel: usbserial.c: minor base = 0
May 18 10:59:35 hilbert kernel: usbserial.c: Digi USB converter now attached to
ttyUSB0 (or usb/tts/0 for devfs)
May 18 10:59:35 hilbert kernel: usbserial.c: Digi USB converter now attached to
ttyUSB1 (or usb/tts/1 for devfs)
May 18 10:59:35 hilbert kernel: usbserial.c: Digi USB converter now attached to
ttyUSB2 (or usb/tts/2 for devfs)
May 18 10:59:35 hilbert kernel: usbserial.c: Digi USB converter now attached to
ttyUSB3 (or usb/tts/3 for devfs)
May 18 10:59:35 hilbert kernel: usb.c: serial driver claimed interface c56db020
May 18 11:00:01 hilbert kernel: usbserial.c: serial_open
May 18 11:00:01 hilbert kernel: usbserial.c: serial_ioctl port 3
May 18 11:00:01 hilbert kernel: usbserial.c: serial_ioctl port 3
May 18 11:00:01 hilbert kernel: usbserial.c: serial_set_termios port 3
May 18 11:00:04 hilbert kernel: usbserial.c: serial_write port 3, 1024 byte(s)
May 18 11:00:04 hilbert kernel: usbserial.c: serial_write port 3, 994 byte(s)
...
May 18 11:01:42 hilbert kernel: usbserial.c: serial_write port 3, 839 byte(s)
May 18 11:01:42 hilbert kernel: usbserial.c: serial_write port 3, 839 byte(s)
May 18 11:01:42 hilbert kernel: usbserial.c: serial_write port 3, 839 byte(s)
May 18 11:01:42 hilbert kernel: usbserial.c: serial_write port 3, 839 byte(s)
May 18 11:01:42 hilbert kernel: usbserial.c: serial_write port 3, 839 byte(s)
May 18 11:01:42 hilbert kernel: usbserial.c: serial_write port 3, 839 byte(s)
May 18 11:01:42 hilbert kernel: usbserial.c: serial_write port 3, 839 byte(s)
May 18 11:06:26 hilbert syslogd 1.3-3: restart.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
