* Brad Hards
> However there is some code you could try that works for some people:
> http://drivers.rd.ilan.net/kaweth/kaweth-0.2.tar.gz
>
> You need to hack in your vendor and product ID.
> Hope this helps
Definitly! Tried the kaweth driver a bit. I still don't get any
network interface, but at least I get some more log-messages (debug
enabled) to ponder at. A printout is included below. As one can see it
stops at the point where it's about to download the firmware. Perhaps
it's possible to try out various things here?
Yes, the unit is a 10 BaseT only box (the documentation says max 8 Mb
transfer rate).
> Brad
best regards,
kmm
: Kawasaki USB->Ethernet Driver loading...
: usb.c: registered new driver kaweth
: Kawasaki Device Probe: 0x0707:0x0100
: EZ Connect USB/Ethernet Converter connected...
: Reading kaweth configuration
: Request type: c0 Request: 0 Value: 0 Index: 0 Length: 12
: usb-uhci.c: interrupt, status 2, frame# 845
: usb-uhci-debug.h: TD @ c58a5920/058A5920, MaxLen=07 DT0 EP=0 Dev=2 PID=(SETUP)
:buf=041523a0
: usb-uhci-debug.h: Len=07 e0 Stalled CRC/Timeo May 14 04:02:39 varg kernel:
:usb-uhci-debug.h: Link points to TD @ 058a5aa0, Breadth first
: kaweth control message failed (urb addr: cba7cc00) May 14 04:02:39 varg kernel:
:usb-uhci.c: interrupt, status 2, frame# 847
: usb-uhci-debug.h: TD @ c58a57e0/058A57E0, MaxLen=07 DT0 EP=0 Dev=2 PID=(SETUP)
:buf=03f12c00
: usb-uhci-debug.h: Len=07 e0 SPD Stalled CRC/Timeo
: usb-uhci-debug.h: Link points to TD @ 058a59a0, Breadth first
: usb-uhci.c: interrupt, status 2, frame# 849
: usb-uhci-debug.h: TD @ c58a5a20/058A5A20, MaxLen=07 DT0 EP=0 Dev=2 PID=(SETUP)
:buf=03f12c00
: usb-uhci-debug.h: Len=07 e0 SPD Stalled CRC/Timeo
: usb-uhci-debug.h: Link points to TD @ 058a59e0, Breadth first
: Actual length: 0, length 18
: Resetting...
: usb-uhci.c: interrupt, status 2, frame# 851
: usb-uhci-debug.h: TD @ c58a59a0/058A59A0, MaxLen=07 DT0 EP=0 Dev=2 PID=(SETUP)
:buf=03f12c00
: usb-uhci-debug.h: Len=07 e0 SPD Stalled CRC/Timeo
: usb-uhci-debug.h: Link points to TD @ 058a57e0, Breadth first
: Downloading firmware at cc07db38 to kaweth device at c8038000...
: Firmware length: 3838
: Request type: 40 Request: ff Value: 0 Index: 0 Length: efe
: usb-uhci.c: interrupt, status 2, frame# 864
: usb-uhci-debug.h: TD @ c58a59e0/058A59E0, MaxLen=07 DT0 EP=0 Dev=2 PID=(SETUP)
:buf=03f12c00
: usb-uhci-debug.h: Len=07 e0 Stalled CRC/Timeo May 14 04:02:39 varg kernel:
:usb-uhci-debug.h: Link points to TD @ 058a5a20, Breadth first
: kaweth control message failed (urb addr: cba7cc00) May 14 04:02:39 varg kernel:
:usb-uhci.c: interrupt, status 2, frame# 866
: usb-uhci-debug.h: TD @ c58a57e0/058A57E0, MaxLen=07 DT0 EP=0 Dev=2 PID=(SETUP)
:buf=041523a0
: usb-uhci-debug.h: Len=07 e0 SPD Stalled CRC/Timeo
: usb-uhci-debug.h: Link points to TD @ 058a59a0, Breadth first
: usb-uhci.c: interrupt, status 2, frame# 869
: usb-uhci-debug.h: TD @ c58a5ee0/058A5EE0, MaxLen=07 DT0 EP=0 Dev=2 PID=(SETUP)
:buf=041523a0
: usb-uhci-debug.h: Len=07 e0 SPD Stalled CRC/Timeo
: usb-uhci-debug.h: Link points to TD @ 058a5ea0, Breadth first
: Actual length: 0, length 3838
: Error downloading firmware (-110), no net device created
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
