Folks,
This is truly wierd.
After struggling with the PCI Address conflict problem for weeks, and getting
nowhere, I recompiled my kernel again.
Then the address conflict disappeared again.
I enclose a diff of the .config that caused the problem and the .config that
seems to work.
However I am VERY VERY scared to recompile this kernel again, in case the
problem comes back.
lspci -vv enclosed also, as well as dmesg
Thanks,
Alanp
[root@ultra linux]# diff .config ../.config
125c125
< CONFIG_PACKET_MMAP=y
---
> # CONFIG_PACKET_MMAP is not set
178c178
< CONFIG_IDEDISK_MULTI_MODE=y
---
> # CONFIG_IDEDISK_MULTI_MODE is not set
419c419
< CONFIG_FAT_FS=m
---
> # CONFIG_FAT_FS is not set
dmesg
04k available (924k kernel code, 3080k reserved, 68k data, 164k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
CPU: L1 I Cache: 32K L1 D Cache: 32K
CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.36 (20000221) Richard Gooch ([EMAIL PROTECTED])
PCI: BIOS32 Service Directory structure at 0xc00e8050
PCI: BIOS32 Service Directory entry at 0xeb110
PCI: BIOS probe returned s=00 hw=11 ver=02.10 l=00
PCI: PCI BIOS revision 2.10 entry at 0xeb150, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: IDE base address fixup for 00:01.1
PCI: Scanning for ghost devices on bus 0
PCI: IRQ init
PCI: Interrupt Routing Table found at 0xc00fe840
00:01 slot=00 0:00/1ef8 1:00/1ef8 2:63/02f8 3:63/02f8
00:03 slot=00 0:60/0400 1:61/0400 2:00/0c00 3:00/0c00
PCI: Using IRQ router PIIX [8086/122e] at 00:01.0
PCI: IRQ fixup
00:02.0: ignoring bogus IRQ 255
IRQ for 00:01.2(3) via 00:01.2 -> PIRQ 63, mask 02f8, excl 0000 ... failed
IRQ for 00:02.0(0) via 00:02.0 -> not found in routing table
PCI: Allocating resources
PCI: Resource 00001100-0000110f (f=101, d=0, p=0)
PCI: Resource 00004000-0000401f (f=101, d=0, p=0)
PCI: Resource fdc00000-fdffffff (f=200, d=0, p=0)
PCI: Resource fe7f0000-fe7fffff (f=200, d=0, p=0)
PCI: Resource fe000000-fe3fffff (f=200, d=0, p=0)
PCI: Resource 10000000-10000fff (f=200, d=0, p=0)
PCI: Resource 10001000-10001fff (f=200, d=0, p=0)
PCI: Sorting device list...
Limiting direct PCI/PCI transfers.
isapnp: Scanning for Pnp cards...
isapnp: Card 'ESS ES1869 Plug and Play AudioDrive'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
kmem_create: Poisoning requested, but con given - skbuff_head_cache
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
Starting kswapd v1.6
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 09
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA MK6412MAT, ATA DISK drive
hdc: CRN-8241B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12685680 sectors (6495 MB), CHS=839/240/63, (U)DMA
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 164k freed
Adding Swap: 68004k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: ESS ES1869 Plug and Play AudioDrive detected
sb: ISAPnP reports 'ESS ES1869 Plug and Play AudioDrive' at i/o 0x220, irq 5, dma 1, 3
SB 3.01 detected OK (220)
ESS chip ES1869 detected
sb: 1 Soundblaster PnP card(s) found.
Linux PCMCIA Card Services 3.1.11
options: [pci] [cardbus] [pm]
Intel PCIC probe:
Intel i82365sl DF ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
host opts [0]: none
host opts [1]: none
ISA irqs (scanned) = 3,4,7,9,11 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x2f8-0x2ff 0x330-0x337 0x378-0x37f
0x388-0x38f 0x398-0x39f 0x3f8-0x3ff 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:80:C8:8F:0F:5B
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
hub.c: We are here before pid=...
hub.c: looks like we made it this far
IRQ for 00:01.2(3) via 00:01.2 -> PIRQ 63, mask 02f8, excl 0000 -> newirq=9 ->
assigning IRQ 9 ... OK
PCI: Assigned IRQ 9 for device 00:01.2
uhci.c: USB UHCI at I/O 0x4000, IRQ 9
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
usb.c: kmalloc IF c5519600, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: 4000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: ganged power switching
hub.c: standalone hub
hub.c: global over-current protection
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port 1 is removable
hub.c: port 2 is removable
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c5519600
uhci.c: root-hub INT complete: port1: 1a3 port2: 80 data: 2
hub.c: port 1 connection change
hub.c: portstatus 301, change 1, Low Speed
hub.c: portstatus 303, change 0, Low Speed
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF c52d3140, numif 2
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: error getting string descriptor 0 (error=-32)
usb.c: USB device number 2 default language ID 0x409
Product: KEYBOARD & MOUSE
usb.c: unhandled interfaces on device
usb.c: This device is not recognized by any installed USB driver.
Length = 18
DescriptorType = 01
USB version = 1.00
Vendor:Product = 060b:2101
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 1.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 003b
bNumInterfaces = 02
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = a0
MaxPower = 100mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 01
bInterface Class:SubClass:Protocol = 03:01:01
iInterface = 04
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0008
bInterval = 0a
Interface: 1
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 01
bAlternateSetting = 00
bNumEndpoints = 01
bInterface Class:SubClass:Protocol = 03:01:02
iInterface = 05
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 82 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0003
bInterval = 0a
usb.c: registered new driver keyboard
input0: USB HIDBP keyboard
usb.c: keyboard driver claimed interface c52d3140
keybdev.c: Adding keyboard: input0
00:00.0 Host bridge: Intel Corporation 430TX - 82439TX MTXC (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0 set
00:01.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 set
00:01.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 set
Region 4: I/O ports at 1100
00:01.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 4000
00:01.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:02.0 VGA compatible controller: Trident Microsystems TGUI 9660/9680/9682 (rev d3)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fdc00000 (32-bit, non-prefetchable)
Region 1: Memory at fe7f0000 (32-bit, non-prefetchable)
Region 2: Memory at fe000000 (32-bit, non-prefetchable)
00:03.0 CardBus bridge: Texas Instruments: Unknown device ac1c (rev 01)
Subsystem: Unknown device 104c:ac1c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 set, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 10000000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=01, subordinate=00, sec-latency=32
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0007
00:03.1 CardBus bridge: Texas Instruments: Unknown device ac1c (rev 01)
Subsystem: Unknown device 104c:ac1c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 set, cache line size 08
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 10001000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=03, subordinate=00, sec-latency=32
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0007
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
