On Thu, 1 Jun 2000, Johannes Erdfelt wrote:
> On Wed, May 31, 2000, Ken Scott <[EMAIL PROTECTED]> wrote:
> > On Wed, 31 May 2000, Johannes Erdfelt wrote:
> >
[snip]
> > I have attached my /proc/bus/usb/drivers and devices as well as the
> > portion of /var/log/messages from when I attached the monitor to the root
> > hub on the PC. Disregard all the disconnects before that, I was taking
> > everything else off of the chain.
> >
> > After attaching the hub, I plugged in a SanDisk CF reader (the one that
> > works, thanks Matt D!), and tried to mount it. That is the /dev/sda1
> > error.
> >
> > What else can I provide to you? I did have the USB debugging enabled, as
> > well as the patch applied.
>
> So with this patch, things are working better?
>
Looks like same, same to me.
> It's hard to tell what's happening here since I don't see a connect message
> for the Sandisk, nor do I see it in the 'devices' output.
>
That's the major problem. There is nothing going on, and no indication of
any errors being put into /var/log/messages. I get the message that the
monitor hub is being added (which you saw), but then nothing else. I also
don't see where it is counting the 4 ports in the hub. Should it do that?
--
><> Ken Scott [EMAIL PROTECTED] http://www.pcisys.net/~kscott
This is the day that the Lord has made;
I will rejoice and be glad in it! -- Psalm 118:24
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
