On Mon, 5 Jun 2000, Johannes Erdfelt wrote:
> On Mon, Jun 05, 2000, Mark Douglas Corner <[EMAIL PROTECTED]> wrote:
> > I have an unreleased device that I am attempting to get working under
> > linux. It works fine under win98. Also I am having the same problem with
> > an Intel USB camera. I know that there are no drivers for these, but as
> > you can see that isn't the problem here. I did manage to get a USB
> > keyboard to connect correctly.
> >
> > Fortunately I have a CATC USB Chief analyzer, although I have to note that
> > I am somewhat new to USB.
>
> Could you give us a copy of the traces? The software to view the traces
> is available for free from CATC's website for anyone to use. It
> unfortunately is Windows only.
I just plugged Intel ProShare camera into usb-uhci:
[root@usb dmitri]# cat /proc/bus/usb/devices
[...]
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl= 1ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04c8 ProdID=0720 Rev= 1.01
C: #Ifs= 0 Cfg#= 0 Atr=00 MxPwr= 0mA
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
[...]
With uhci.o:
[root@usb dmitri]# cat /proc/bus/usb/devices
[...]
S: Product=USB UHCI-alt Root Hub
[...]
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl= 1ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 0
P: Vendor=0000 ProdID=0000 Rev= 0.00
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
[...]
I have both OHCI and UHCI here. Philips speakers are shown above the
camera, OHCI hub below. I have no USB bus analyzer.
However, Intel ProShare camera is known to be quirky (for example, it does
not work with OHCI, -officially-). I do not know if this behavior
signifies anything...
Unrelated to enumeration problem: I already captured logs of USB traffic
between this camera (Intel ProShare) and Win98. If anyone has time to work
on a driver I can email them; otherwise it will stay on backburner for
some more time...
Thanks,
Dmitri
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
