Matt,
usb-storage.c lists (in the unusual_dev array) a Y-E Data floppy drive
rev. 1.14 but it doesn't list rev 3.04 (the newer blue/gray one).
Should this one be listed also?
The reason that I'm asking is that I'm getting all of the LUN searching
that doesn't look like it should be happening. (log attached)
Also, after usb-storage recognized the floppy drive, I used to be
able to enter: mount /dev/sda (no other SCSI in my system),
where /dev/sda is listed in /etc/fstab .
I can't do that now. mount replies:
[rdunlap@dragon usb]$ mount /dev/sda
mount: /dev/sda has wrong major or minor number
[rdunlap@dragon usb]$
and it does this with /dev/sd[a-g]. Did something change in
this area? How do I know what to mount?
Thanks,
Randy
hub.c: port 2 enable change, status 100
hub.c: port 1 connection change
hub.c: portstatus 101, change 1, 12 Mb/s
hub.c: portstatus 103, change 10, 12 Mb/s
usb.c: USB new device connect, assigned device number 4
usb.c: kmalloc IF cb154620, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 4 default language ID 0x409
Manufacturer: Y-E DATA
Product: FlashBuster-U
usb.c: unhandled interfaces on device
usb.c: This device is not recognized by any installed USB driver.
Length = 18
DescriptorType = 01
USB version = 1.00
Vendor:Product = 057b:0000
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 3.04
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0027
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = 80
MaxPower = 500mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 03
bInterface Class:SubClass:Protocol = 08:04:00
iInterface = 04
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 02 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0002
bInterval = 10
usb.c: registered new driver usb-storage
usb-storage.c: Searching unusual device list for (0x57b, 0x0, 0x304)...
usb-storage.c: -- found matching device: Y-E Data Flashbuster-U
usb-storage.c: USB Mass Storage device detected
usb-storage.c: Endpoints: In: 0xce42c8a0 Out: 0xce42c8b1 Int: 0xce42c8c2 (Period 16)
usb-storage.c: Result from usb_set_interface is 0
usb-storage.c: New GUID 057b00000000000000000000
usb-storage.c: Transport: Control/Bulk
usb-storage.c: Protocol: Uniform Floppy Interface (UFI)
usb-storage.c: *** thread sleeping.
scsi1 : SCSI emulation for USB Mass Storage devices
scsi : 2 hosts.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Command INQUIRY (6 bytes)
usb-storage.c: 12 00 00 00 ff 00 01 40 77 00
usb-storage.c: Call to usb_stor_control_msg() returned 12
usb-storage.c: us_transfer_partial(): xfer 256 bytes
usb-storage.c: usb_stor_bulk_msg() returned 0 xferred 36/256
usb-storage.c: CB data stage result is 0x1
usb-storage.c: -- CB transport device requiring auto-sense
usb-storage.c: ** no auto-sense for a special command
usb-storage.c: scsi cmd done, result=0x0
usb-storage.c: *** thread sleeping.
Vendor: Y-E DATA Model: USB-FDU Rev: 3.04
Type: Direct-Access ANSI SCSI revision: 02
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (1/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (2/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (3/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (4/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (5/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (6/0)
usb-storage.c: *** thread sleeping.
usb-storage.c: us_queuecommand() called
usb-storage.c: *** thread awakened.
usb-storage.c: Bad device number (7/0)
usb-storage.c: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
usb.c: usb-storage driver claimed interface cb154620
usb-storage.c: Searching unusual device list for (0x698, 0x1786, 0x1)...
usb-storage.c: -- did not find a matching device
USB Mass Storage support registered.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
