On Fri, 16 Jun 2000, Jason Sharpee wrote:
>
> I tried out pegasus 0.4b with 2.4.0tac19 and if I touch the eth0 device
> with ifconfig I get a kernel OOPS. Ifconfig starts to return "Invalid
> Operand: 0000" and then the register dump occurs. Ill see if I can get the
> OOPS message if anyone is interested.
>
*** Important.. Forgot to mention that 0.4b was working fine on
2.4.0tac11.
>
> On Thu, 15 Jun 2000, Petko Manolov wrote:
>
> > Jason Sharpee wrote:
> > >
> > > I admit its very odd that I seem to be the only person that is having
> > > these issues with the device I have on OHCI. The machine I have is quite
> > > an oddball though being a Cyrix MediaGX 180 with only 16 megs of ram, no
> > > swap. I was pondering once that the problems may be caused by a failure to
> > > allocate memory, due to a memory leak somewhere, but in the code I
> > > looked at there were checks for failed allocation. And upon checking
> > > /proc/meminfo after the usb stops working I am still seeing about 512K
> > > free.
> > >
> > > The machine is fairly slow and I thought also it might not be keeping up
> > > with the USB bus as times.
> >
> >
> > It is quite possible. Is this your only machine with usb ports?
> > If this is a error seen only on Cyrix or and on other machines/
> > platforms? I wouldn't say my machine is very fast ( k6-350 ),
> > but is not very slow OTOH.
>
> I only have this issue on my Cyrix systems.. Unfortunately these are the
> only OHCI systems I have.
>
> -Jason
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
