The pegasus driver seems to recognize the Linksys USB100TX (rev 3.0) as
belonging to it. It adds an interface (eth1), but it is unable to start
the device when the command ifconfig eth1 192.168.1.129 is issued. The
reported error is parity FAIL fff. The full message log of usb-related
messages is attached, as is the contents of /proc/bus/usb/devices. Of
course, the device does work with the operating system that Linksys
supports.
Is this adapter supported at this time? Does anyone have tips on getting
it to work?
I will be happy to run additional tests that may contribute to adding
support for this device.
Dave
I
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=066b ProdID=2203 Rev= 1.01
S: Manufacturer=LINKSYS Inc.
S: Product=LINKSYS USB Adapter
S: SerialNumber=7d7a0a
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=286mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=pegasus
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 1ms
Kernel messages starting modprobe usbcore
Jun 18 13:44:41 dsl kernel: usb.c: registered new driver usbdevfs
Jun 18 13:44:41 dsl kernel: usb.c: registered new driver hub
Modprbe usb-uhci
Jun 18 13:45:16 dsl modprobe: modprobe: Can't locate module usbfs
Jun 18 13:46:12 dsl kernel: usb-uhci.c: $Revision: 1.232 $ time 23:22:13 Jun 17 2000
Jun 18 13:46:12 dsl kernel: usb-uhci.c: High bandwidth mode enabled
Jun 18 13:46:12 dsl kernel: usb-uhci.c: Intel USB controller: setting latency timer to
0
Jun 18 13:46:12 dsl kernel: usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
Jun 18 13:46:12 dsl kernel: usb-uhci.c: Detected 2 ports
Jun 18 13:46:12 dsl kernel: usb.c: new USB bus registered, assigned bus number 1
Jun 18 13:46:12 dsl kernel: usb.c: USB new device connect, assigned device number 1
Jun 18 13:46:12 dsl kernel: Product: USB UHCI Root Hub
Jun 18 13:46:12 dsl kernel: SerialNumber: e000
Jun 18 13:46:12 dsl kernel: hub.c: USB hub found
Jun 18 13:46:12 dsl kernel: hub.c: 2 ports detected
Jun 18 13:46:13 dsl kernel: usb.c: USB new device connect, assigned device number 2
Jun 18 13:46:13 dsl kernel: Manufacturer: LINKSYS Inc.
Jun 18 13:46:13 dsl kernel: Product: LINKSYS USB Adapter
Jun 18 13:46:13 dsl kernel: SerialNumber: 7d7a0a
Jun 18 13:46:13 dsl kernel: usb.c: This device is not recognized by any installed USB
driver.
Jun 18 13:46:13 dsl kernel: Length = 18
Jun 18 13:46:13 dsl kernel: DescriptorType = 01
Jun 18 13:46:13 dsl kernel: USB version = 1.10
Jun 18 13:46:13 dsl kernel: Vendor:Product = 066b:2203
Jun 18 13:46:13 dsl kernel: MaxPacketSize0 = 8
Jun 18 13:46:13 dsl kernel: NumConfigurations = 1
Jun 18 13:46:13 dsl kernel: Device version = 1.01
Jun 18 13:46:13 dsl kernel: Device Class:SubClass:Protocol = 00:00:00
Jun 18 13:46:13 dsl kernel: Per-interface classes
Jun 18 13:46:13 dsl kernel: Configuration:
Jun 18 13:46:13 dsl kernel: bLength = 9
Jun 18 13:46:13 dsl kernel: bDescriptorType = 02
Jun 18 13:46:13 dsl kernel: wTotalLength = 0027
Jun 18 13:46:13 dsl kernel: bNumInterfaces = 01
Jun 18 13:46:13 dsl kernel: bConfigurationValue = 01
Jun 18 13:46:13 dsl kernel: iConfiguration = 00
Jun 18 13:46:13 dsl kernel: bmAttributes = a0
Jun 18 13:46:13 dsl kernel: MaxPower = 286mA
Jun 18 13:46:13 dsl kernel:
Jun 18 13:46:13 dsl kernel: Interface: 0
Jun 18 13:46:13 dsl kernel: Alternate Setting: 0
Jun 18 13:46:13 dsl kernel: bLength = 9
Jun 18 13:46:13 dsl kernel: bDescriptorType = 04
Jun 18 13:46:13 dsl kernel: bInterfaceNumber = 00
Jun 18 13:46:13 dsl kernel: bAlternateSetting = 00
Jun 18 13:46:13 dsl kernel: bNumEndpoints = 03
Jun 18 13:46:13 dsl kernel: bInterface Class:SubClass:Protocol = 00:00:00
Jun 18 13:46:13 dsl kernel: iInterface = 00
Jun 18 13:46:13 dsl kernel: Endpoint:
Jun 18 13:46:13 dsl kernel: bLength = 7
Jun 18 13:46:13 dsl kernel: bDescriptorType = 05
Jun 18 13:46:13 dsl kernel: bEndpointAddress = 81 (in)
Jun 18 13:46:13 dsl kernel: bmAttributes = 02 (Bulk)
Jun 18 13:46:13 dsl kernel: wMaxPacketSize = 0040
Jun 18 13:46:13 dsl kernel: bInterval = 00
Jun 18 13:46:13 dsl kernel: Endpoint:
Jun 18 13:46:13 dsl kernel: bLength = 7
Jun 18 13:46:13 dsl kernel: bDescriptorType = 05
Jun 18 13:46:13 dsl kernel: bEndpointAddress = 02 (out)
Jun 18 13:46:13 dsl kernel: bmAttributes = 02 (Bulk)
Jun 18 13:46:13 dsl kernel: wMaxPacketSize = 0040
Jun 18 13:46:13 dsl kernel: bInterval = 00
Jun 18 13:46:13 dsl kernel: Endpoint:
Jun 18 13:46:13 dsl kernel: bLength = 7
Jun 18 13:46:13 dsl kernel: bDescriptorType = 05
Jun 18 13:46:13 dsl kernel: bEndpointAddress = 83 (in)
Jun 18 13:46:13 dsl kernel: bmAttributes = 03 (Interrupt)
Jun 18 13:46:13 dsl kernel: wMaxPacketSize = 0008
Jun 18 13:46:13 dsl kernel: bInterval = 01
Modprobe pegasus
Jun 18 13:47:03 dsl kernel: pegasus.c: v0.3.14 2000/06/09 (C) 1999-2000 Petko Manolov
([EMAIL PROTECTED])
Jun 18 13:47:03 dsl kernel: usb.c: registered new driver pegasus
Jun 18 13:47:03 dsl kernel: eth1: Linksys USB100TX
ifconfig eth1 after pegasus module loaded
eth1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
ifconfig eth1 after ifconfig eth1 192.168.1.129
eth1 Link encap:Ethernet HWaddr 00:E0:98:7D:7A:0A
inet addr:192.168.1.129 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Kernel messages generated by ifconfig eth1 192.168.1.129
Jun 18 13:52:48 dsl kernel: pegasus.c: party FAIL ffff
Jun 18 13:52:48 dsl kernel: pegasus.c: (open)failed intr_urb -22
Jun 18 13:52:48 dsl kernel: pegasus.c: eth1: set Rx mode
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
