Felipe Balbi ha scritto:
Hi,
On Jan 30, 2008 3:36 AM, Cristian Chiarello <[EMAIL PROTECTED]> wrote:
Hi,
I have readed "isp116x embedded programming guide" and if I haven't
misunderstood, it's need to add ITL buffer management and to change irq
handler routine. Is this the just way?
Hack the isp1362 nxp open source driver for isp1161x could be another way?
Sorry, couldn't get you. Do you have the isp116x host controller or
the isp1362 otg controller ?
I have an isp1161A.
isp116x has already support in kernel: drivers/usb/host/isp116x-hcd.c
Yes, and work fine. The problem is that it lack isoc transfer support.
I need it for a quickcam 4000 pro that work on 2.4.21-rmk1 kernel with
hacked philips driver. I have updated kernel form 2.4.21-rmk1 to 2.6.23:
all driver was ported, but the philips driver is too old for the new kernel.
isp1362 has nothing to do with isp116x, better writing a new driver
for it. And as it's an isp transceiver, it's probably connected
through i2c. So write a new driver based on isp1301_omap.c (it's
located under drivers/i2c/chips/isp1301_omap.c)
BTW, the list has been moved to [email protected], use it instead.
Thank you very much Felipe, I have posted all my messages to the old ML.
My idea was to add isoc support to the actual driver but also I take a
look to the isp1301_omap.c (and i post my message about isoc to the new ML)
Cristian C.
-
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
