From: Oliver Neukum <[EMAIL PROTECTED]>
If disconnect() is called for a logical disconnect, no more IO must be
done after disconnect() returns, or the old and new drivers may conflict.
This patch avoids this by using the flag and lock introduced by the earlier
patch for the mos7720 driver.
Signed-off-by: Oliver Neukum <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
drivers/usb/serial/kl5kusb105.c | 26 +++++++++++++++-----------
1 files changed, 15 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 90e3216..55736df 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -461,17 +461,21 @@ static void klsi_105_close (struct usb_serial_port *port,
struct file *filp)
dbg("%s port %d", __FUNCTION__, port->number);
- /* send READ_OFF */
- rc = usb_control_msg (port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- KL5KUSB105A_SIO_CONFIGURE,
- USB_TYPE_VENDOR | USB_DIR_OUT,
- KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
- 0, /* index */
- NULL, 0,
- KLSI_TIMEOUT);
- if (rc < 0)
- err("Disabling read failed (error = %d)", rc);
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected) {
+ /* send READ_OFF */
+ rc = usb_control_msg (port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ KL5KUSB105A_SIO_CONFIGURE,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+ 0, /* index */
+ NULL, 0,
+ KLSI_TIMEOUT);
+ if (rc < 0)
+ err("Disabling read failed (error = %d)", rc);
+ }
+ mutex_unlock(&port->serial->disc_mutex);
/* shutdown our bulk reads and writes */
usb_kill_urb(port->write_urb);
--
1.5.3.8
-
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
