On Tuesday 19 February 2008, Adrian Knoth wrote: > Hi! > > Since 2.6.24, I encounter the following problem: > > When I suspend-to-RAM my HP nx6325 laptop with no device connected to > the OHCI port, the port will not be active after resuming.
For the record, I tried this on a pure-OHCI system I have handy (and was doing other suspend/resume testing on) ... no problems with that at all. So I'd think any problem is related to the EHCI linkage, and maybe even something that's specific to your system. You could verify that by "rmmod ehci-hcd" before suspending. Does this failure happen in 2.6.25-rc2 as well? (You might wait what I suspect will be a couple days for RC3 to appear.) - Dave > I have to unload and modprobe ohci_hcd to reactivate it. The EHCI ports > on the left side do not show this problem, they can be used without > reloading any module. > > Things are even worse: if I have a USB device plugged into the OHCI > port before I suspend, the port is fully functional after resuming. > > > Should I provide more information (e.g. dmesg), or can you reproduce > this bug? > > TIA > - To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
