Sebastian Andrzej Siewior <[email protected]> wrote:
> On Wed, Oct 24, 2012 at 11:13:51AM -0400, [email protected] wrote:
> > I cannot post dmesg output befcause it starts spewing messages before
> > any disk is mounted -- I have to shut down and reboot without the drive
> > plugged in. But see a previous message where I posted some more
> > information in this thread. But to answer your questions, the enclosure
> > has its own power and it does work with usb2 -- although I have not
> > booted with it plugged in in that state, so I will have to check.
>
> So it does not get better if you unplugg the device later on? You could either
> try netconsole (Documentation/networking/netconsole.txt assuming you have
> already network) if this works or maybe even simpler, boot your own kernel and
> after you booted modprobe the xhci driver (and hope that it still behaves that
> way).
I will have to try that, but when this has happened in the past with
kernels like 3.4.0, unplugging and replugging the drive did not fix
anything. I will have to see if the xhci module is in there at the
time.
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici
[email protected]
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
