>
> This patchset adds fully tested otg id switch function and
> vbus connect/disconnect detection for chipidea driver.
> The mainly design of id/vbus handling follows msm otg driver.
> I hope the msm usb maintainer can have a look of this patchset,
> and give some comments, and move the whole msm usb driver to
> chipidea framework if possible in the future.
>
> This patchset is fully tested at i.mx6Q saberlite board after adding
> one pinctrl workaround(https://github.com/hzpeterchen/linux-
> usb/commit/777425d693885a5f921a4b0bca45653a06e360dc)
>
> There is github repo for my chipdiea branch:
> https://github.com/hzpeterchen/linux-usb.git
>
Hi Alexander, would you give some comments about this serial?
Thanks.
Peter
> Peter Chen (4):
> Revert "USB: chipidea: add vbus detect for udc"
> usb: chipidea: add otg id switch and vbus connect/disconnect detect
> usb: chipidea: udc: add pullup/pulldown dp at hw_device_state
> usb: chipidea: imx: add internal vbus regulator control
>
> drivers/usb/chipidea/Makefile | 2 +-
> drivers/usb/chipidea/bits.h | 10 ++
> drivers/usb/chipidea/ci.h | 9 ++-
> drivers/usb/chipidea/ci13xxx_imx.c | 67 ++++++++---
> drivers/usb/chipidea/core.c | 217
> +++++++++++++++++++++++++++++++++---
> drivers/usb/chipidea/otg.c | 60 ++++++++++
> drivers/usb/chipidea/otg.h | 6 +
> drivers/usb/chipidea/udc.c | 47 ++------
> 8 files changed, 342 insertions(+), 76 deletions(-)
> create mode 100644 drivers/usb/chipidea/otg.c
> create mode 100644 drivers/usb/chipidea/otg.h
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
