From: "Jason J. Herne" <hern...@gmail.com>
Force large capacity (> 2TB) drives in USB enclosures to use READ(16) instead
of READ(10). Some(most/all?) enclosures do not like READ(10) commands when a
large capacity drive is installed.
Signed-off-by: Jason J. Herne <hern...@gmail.com>
---
drivers/scsi/sd.c | 7 +++++--
drivers/usb/storage/scsiglue.c | 5 +++++
include/scsi/scsi_device.h | 1 +
3 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 4b63c73..9b65ddf 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -649,7 +649,7 @@ static int sd_prep_fn(struct request_queue *q, struct
request *rq)
sector_t block = blk_rq_pos(rq);
sector_t threshold;
unsigned int this_count = blk_rq_sectors(rq);
- int ret, host_dif;
+ int ret, host_dif, force_read16;
unsigned char protect;
/*
@@ -797,6 +797,9 @@ static int sd_prep_fn(struct request_queue *q, struct
request *rq)
else
protect = 0;
+ /* Many large capacity USB drives/controllers require the use of
read(16). */
+ force_read16 = (sdkp->capacity > 0xffffffffULL && sdp->force_read_16);
+
if (host_dif == SD_DIF_TYPE2_PROTECTION) {
SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
@@ -833,7 +836,7 @@ static int sd_prep_fn(struct request_queue *q, struct
request *rq)
SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
- } else if (block > 0xffffffff) {
+ } else if (block > 0xffffffff || force_read16) {
SCpnt->cmnd[0] += READ_16 - READ_6;
SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 :
0);
SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >>
56) & 0xff : 0;
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 13b8bcd..6ff785e 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -251,6 +251,11 @@ static int slave_configure(struct scsi_device *sdev)
US_FL_SCM_MULT_TARG)) &&
us->protocol == USB_PR_BULK)
us->use_last_sector_hacks = 1;
+
+ /* Force read-16 for large capacity drives. */
+ sdev->force_read_16 = 1;
+
+
} else {
/* Non-disk-type devices don't need to blacklist any pages
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 5591ed5..e92b846 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -134,6 +134,7 @@ struct scsi_device {
* because we did a bus reset. */
unsigned use_10_for_rw:1; /* first try 10-byte read / write */
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
+ unsigned force_read_16:1; /* Use read(16) over read(10) */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
