On Tue, Nov 20, 2012 at 02:44:35PM +0200, Alexander Shishkin wrote:
> Peter Chen <[email protected]> writes:
>
> > diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
> > index d738603..d32f932 100644
> > --- a/drivers/usb/chipidea/ci.h
> > +++ b/drivers/usb/chipidea/ci.h
> > @@ -139,6 +139,7 @@ struct ci13xxx {
> > enum ci_role role;
> > bool is_otg;
> > struct work_struct work;
> > + struct delayed_work dwork;
> > struct workqueue_struct *wq;
> >
> > struct dma_pool *qh_pool;
> > @@ -164,6 +165,11 @@ struct ci13xxx {
> > bool global_phy;
> > struct usb_phy *transceiver;
> > struct usb_hcd *hcd;
> > + /* events handled at ci_role_work */
> > +#define ID 0
> > +#define B_SESS_VALID 1
> > + unsigned long events;
>
> I would still like bools or ints here.
events will be as parameter for set_bit, for function set_bit
it is define like below:
set_bit(unsigned int nr, volatile unsigned long *addr)
> >
> > /* Controller register map */
> > static uintptr_t ci_regs_nolpm[] = {
> > @@ -264,25 +265,131 @@ static enum ci_role ci_otg_role(struct ci13xxx *ci)
> > return role;
> > }
> >
> > +#define CI_WAIT_VBUS_STABLE_TIMEOUT 500
> > /**
> > - * ci_role_work - perform role changing based on ID pin
> > - * @work: work struct
> > + * ci_wait_vbus_stable
> > + * When usb role switches, we need to turn on/off internal vbus
> > + * regulaor, sometimes, the real vbus value may not lower fast
> > + * enough due to capacitance, and we do want the vbus lower
> > + * than 0.8v if it is device mode, and higher than 4.4v, if it
> > + * is host mode.
> > + *
> > + * @low: true, Wait vbus lower than OTGSC_BSV
> > + * : false, Wait vbus higher than OTGSC_AVV
> > */
> > -static void ci_role_work(struct work_struct *work)
> > +static void ci_wait_vbus_stable(struct ci13xxx *ci, bool low)
> > +{
> > + unsigned long timeout;
> > + u32 otgsc = hw_read(ci, OP_OTGSC, ~0);
> > +
> > + timeout = jiffies + CI_WAIT_VBUS_STABLE_TIMEOUT;
> > +
> > + if (low) {
> > + while (otgsc & OTGSC_BSV) {
> > + if (time_after(jiffies, timeout)) {
> > + dev_err(ci->dev, "wait vbus lower than\
> > + OTGSC_BSV timeout!\n");
> > + return;
> > + }
> > + msleep(20);
> > + otgsc = hw_read(ci, OP_OTGSC, ~0);
> > + }
> > + } else {
> > + while (!(otgsc & OTGSC_AVV)) {
> > + if (time_after(jiffies, timeout)) {
> > + dev_err(ci->dev, "wait vbus higher than\
> > + OTGSC_AVV timeout!\n");
> > + return;
> > + }
> > + msleep(20);
> > + otgsc = hw_read(ci, OP_OTGSC, ~0);
> > + }
> > +
> > + }
> > +}
>
> How about
>
> static int hw_wait_reg(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask,
> unsigned long timeout)
> {
> unsigned long elapse = jiffies + timeout;
>
> while (hw_read(ci, reg, mask)) {
> if (time_after(jiffies, elapse)) {
> dev_err(ci->dev, "timeout waiting for %08x in %d\n",
> mask, reg);
> return -ETIMEDOUT;
> }
> msleep(20);
> }
>
> return 0;
> }
>
> and then also checking if we timed out or everything's fine.
I can use this API, how can this API consolidate both of the case
(<OTGSC_BSV and >OTGSC_AVV)?
>
> Regards,
> --
> Alex
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
