Benjamin Herrenschmidt <[email protected]> writes: > The Aspeed BMC SoCs support a "virtual hub" function. It provides some > HW support for a top-level USB2 hub behind which sit 5 gadget "ports". > > This driver adds support for the full functionality, emulating the > hub standard requests and exposing 5 UDC gadget drivers corresponding > to the ports. > > The hub itself has HW provided dedicated EP0 and EP1 (the latter for > hub interrupts). It also has dedicated EP0s for each function. For > other endpoints, there's a pool of 15 "generic" endpoints that are > shared among the ports. > > The driver relies on my previous patch adding a "dispose" EP op to > handle EP allocation between ports. EPs are allocated from the shared > pool in the UDC "match_ep" callback and assigned to the UDC instance > (added to the gadget ep_list). > > When the composite driver gets unbound, the new hook will allow the UDC > to clean things up and return those EPs to the shared pool. > > Signed-off-by: Benjamin Herrenschmidt <[email protected]> > --- > v4. - Fix missing unlock ast_vhub_udc_wakeup() error path > - Make "irq" signed to deal with error from platform_get_irq > - Fix Makefile for module builds > - Fix a missing endian conversion > > v3. - Rebased > - Add clk stuff > > v2. - Cosmetic fixes > - Properly "allocate" device addresses instead of using a never > reset counter > - Move .dtsi updates to a different patch > > foo > > goo > --- > drivers/usb/gadget/udc/Kconfig | 2 + > drivers/usb/gadget/udc/Makefile | 1 + > drivers/usb/gadget/udc/aspeed-vhub/Kconfig | 6 + > drivers/usb/gadget/udc/aspeed-vhub/Makefile | 3 + > drivers/usb/gadget/udc/aspeed-vhub/core.c | 429 ++++++++++++++ > drivers/usb/gadget/udc/aspeed-vhub/dev.c | 580 +++++++++++++++++++ > drivers/usb/gadget/udc/aspeed-vhub/ep0.c | 474 ++++++++++++++++ > drivers/usb/gadget/udc/aspeed-vhub/epn.c | 840 > ++++++++++++++++++++++++++++ > drivers/usb/gadget/udc/aspeed-vhub/hub.c | 822 +++++++++++++++++++++++++++ > drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 496 ++++++++++++++++ > 10 files changed, 3653 insertions(+) > create mode 100644 drivers/usb/gadget/udc/aspeed-vhub/Kconfig > create mode 100644 drivers/usb/gadget/udc/aspeed-vhub/Makefile > create mode 100644 drivers/usb/gadget/udc/aspeed-vhub/core.c > create mode 100644 drivers/usb/gadget/udc/aspeed-vhub/dev.c > create mode 100644 drivers/usb/gadget/udc/aspeed-vhub/ep0.c > create mode 100644 drivers/usb/gadget/udc/aspeed-vhub/epn.c > create mode 100644 drivers/usb/gadget/udc/aspeed-vhub/hub.c > create mode 100644 drivers/usb/gadget/udc/aspeed-vhub/vhub.h > > diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig > index 1e9567091d86..14cf31a2703a 100644 > --- a/drivers/usb/gadget/udc/Kconfig > +++ b/drivers/usb/gadget/udc/Kconfig > @@ -439,6 +439,8 @@ config USB_GADGET_XILINX > dynamically linked module called "udc-xilinx" and force all > gadget drivers to also be dynamically linked. > > +source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig" > + > # > # LAST -- dummy/emulated controller > # > diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile > index ce865b129fd6..897f648f3cf1 100644 > --- a/drivers/usb/gadget/udc/Makefile > +++ b/drivers/usb/gadget/udc/Makefile > @@ -39,4 +39,5 @@ obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o > obj-$(CONFIG_USB_GR_UDC) += gr_udc.o > obj-$(CONFIG_USB_GADGET_XILINX) += udc-xilinx.o > obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o > +obj-$(CONFIG_USB_ASPEED_VHUB) += aspeed-vhub/ > obj-$(CONFIG_USB_BDC_UDC) += bdc/ > diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig > b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig > new file mode 100644 > index 000000000000..cb022c885425 > --- /dev/null > +++ b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig > @@ -0,0 +1,6 @@ > +config USB_ASPEED_VHUB > + tristate "Aspeed vHub UDC driver" > + depends on ARCH_ASPEED || COMPILE_TEST > + help > + USB peripheral controller for the Aspeed AST2500 family > + SoCs supporting the "vHub" functionality and USB2.0 > diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Makefile > b/drivers/usb/gadget/udc/aspeed-vhub/Makefile > new file mode 100644 > index 000000000000..4256266c0a8a > --- /dev/null > +++ b/drivers/usb/gadget/udc/aspeed-vhub/Makefile > @@ -0,0 +1,3 @@ > +obj-$(CONFIG_USB_ASPEED_VHUB) += aspeed-vhub.o > +aspeed-vhub-y := core.o ep0.o epn.o dev.o hub.o > + > diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c > b/drivers/usb/gadget/udc/aspeed-vhub/core.c > new file mode 100644 > index 000000000000..31ed2b6e241b > --- /dev/null > +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c > @@ -0,0 +1,429 @@
missing SPDX license identifier (all files)
> +static bool force_usb1 = false;
> +static bool no_dma_desc = false;
> +
> +module_param_named(force_usb1, force_usb1, bool, 0644);
> +MODULE_PARM_DESC(force_usb1, "Set to true to force to USB1 speed");
> +module_param_named(no_dma_desc, no_dma_desc, bool, 0644);
> +MODULE_PARM_DESC(no_dma_desc, "Set to true to disable use of DMA
> descriptors");
module parameters? Sorry, but no.
> +void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req,
> + int status)
> +{
> + bool internal = req->internal;
> +
> + EPVDBG(ep, "completing request @%p, status %d\n", req, status);
> +
> + list_del_init(&req->queue);
> +
> + if (req->req.status == -EINPROGRESS)
> + req->req.status = status;
> +
> + if (req->req.dma) {
> + if (!WARN_ON(!ep->dev))
> + usb_gadget_unmap_request(&ep->dev->gadget,
> + &req->req, ep->epn.is_in);
> + req->req.dma = 0;
> + }
> +
> + /*
> + * If this isn't an internal EP0 request, call the core
> + * to call the gadget completion.
> + */
> + if (!internal) {
> + spin_unlock(&ep->vhub->lock);
> + usb_gadget_giveback_request(&ep->ep, &req->req);
> + spin_lock(&ep->vhub->lock);
> + }
> +}
> +
> +void ast_vhub_nuke(struct ast_vhub_ep *ep, int status)
> +{
> + struct ast_vhub_req *req;
> +
> + EPDBG(ep, "Nuking\n");
> +
> + /* terminate any request in the queue */
> + if (list_empty(&ep->queue))
> + return;
unnecessary test.
> +
> + /* Beware, lock will be dropped & req-acquired by done() */
> + while (!list_empty(&ep->queue)) {
> + req = list_first_entry(&ep->queue, struct ast_vhub_req, queue);
list_for_each_entry_safe() ??
> + ast_vhub_done(ep, req, status);
> + }
> +}
> +
> +struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep,
> + gfp_t gfp_flags)
> +{
> + struct ast_vhub_req *req;
> +
> + req = kzalloc(sizeof(*req), gfp_flags);
> + if (!req)
> + return NULL;
Don't you wanna keep a reference to the endpoint that owns $this
request?
> + INIT_LIST_HEAD(&req->queue);
unnecessary list initialization
> + return &req->req;
> +}
> +
> +void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req)
> +{
> + struct ast_vhub_req *req = to_ast_req(u_req);
> +
> + kfree(req);
> +}
> +
> +static irqreturn_t ast_vhub_irq (int irq, void *data)
^
unnecessary space
> +{
> + struct ast_vhub *vhub = data;
> + irqreturn_t iret = IRQ_NONE;
> + u32 istat;
> +
> + /* Stale interrupt while tearing down */
> + if (!vhub->ep0_bufs)
> + return IRQ_NONE;
> +
> + spin_lock(&vhub->lock);
this is your hardirq handler right? Do you really need this lock here?
> +
> + /* Read and ACK interrupts */
> + istat = readl(vhub->regs + AST_VHUB_ISR);
> + if (!istat)
> + goto bail;
> + writel(istat, vhub->regs + AST_VHUB_ISR);
> + iret = IRQ_HANDLED;
> +
> + UDCVDBG(vhub, "irq status=%08x, ep_acks=%08x ep_nacks=%08x\n",
> + istat,
> + readl(vhub->regs + AST_VHUB_EP_ACK_ISR),
> + readl(vhub->regs + AST_VHUB_EP_NACK_ISR));
> +
> + /* Handle generic EPs first */
> + if (istat & VHUB_IRQ_EP_POOL_ACK_STALL) {
> + u32 i, ep_acks = readl(vhub->regs + AST_VHUB_EP_ACK_ISR);
> + writel(ep_acks, vhub->regs + AST_VHUB_EP_ACK_ISR);
> +
> + /* Check if we have a useful ffs on arm ... */
> + for (i = 0; ep_acks && i < AST_VHUB_NUM_GEN_EPs; i++) {
> + u32 mask = 1 << i;
> + if (ep_acks & mask) {
> + ast_vhub_epn_ack_irq(&vhub->epns[i]);
> + ep_acks &= ~mask;
> + }
> + }
> + }
> +
> + /* Handle device interrupts */
> + if (istat & (VHUB_IRQ_DEVICE1 |
> + VHUB_IRQ_DEVICE2 |
> + VHUB_IRQ_DEVICE3 |
> + VHUB_IRQ_DEVICE4 |
> + VHUB_IRQ_DEVICE5)) {
> + if (istat & VHUB_IRQ_DEVICE1)
> + ast_vhub_dev_irq(&vhub->ports[0].dev);
> + if (istat & VHUB_IRQ_DEVICE2)
> + ast_vhub_dev_irq(&vhub->ports[1].dev);
> + if (istat & VHUB_IRQ_DEVICE3)
> + ast_vhub_dev_irq(&vhub->ports[2].dev);
> + if (istat & VHUB_IRQ_DEVICE4)
> + ast_vhub_dev_irq(&vhub->ports[3].dev);
> + if (istat & VHUB_IRQ_DEVICE5)
> + ast_vhub_dev_irq(&vhub->ports[4].dev);
> + }
> +
> + /* Handle top-level vHub EP0 interrupts */
> + if (istat & (VHUB_IRQ_HUB_EP0_OUT_ACK_STALL |
> + VHUB_IRQ_HUB_EP0_IN_ACK_STALL |
> + VHUB_IRQ_HUB_EP0_SETUP)) {
> + if (istat & VHUB_IRQ_HUB_EP0_IN_ACK_STALL)
> + ast_vhub_ep0_handle_ack(&vhub->ep0, true);
> + if (istat & VHUB_IRQ_HUB_EP0_OUT_ACK_STALL)
> + ast_vhub_ep0_handle_ack(&vhub->ep0, false);
> + if (istat & VHUB_IRQ_HUB_EP0_SETUP)
> + ast_vhub_ep0_handle_setup(&vhub->ep0);
> + }
> +
> + /* Various top level bus events */
> + if (istat & (VHUB_IRQ_BUS_RESUME |
> + VHUB_IRQ_BUS_SUSPEND |
> + VHUB_IRQ_BUS_RESET)) {
> + if (istat & VHUB_IRQ_BUS_RESUME)
> + ast_vhub_hub_resume(vhub);
> + if (istat & VHUB_IRQ_BUS_SUSPEND)
> + ast_vhub_hub_suspend(vhub);
> + if (istat & VHUB_IRQ_BUS_RESET)
> + ast_vhub_hub_reset(vhub);
> + }
> +
> + bail:
> + spin_unlock(&vhub->lock);
> + return iret;
> +}
> +
> +void ast_vhub_init_hw(struct ast_vhub *vhub)
> +{
> + u32 ctrl;
> +
> + UDCDBG(vhub,"(Re)Starting HW ...\n");
> +
> + /* Enable PHY */
> + ctrl = VHUB_CTRL_PHY_CLK |
> + VHUB_CTRL_PHY_RESET_DIS;
> +
> +#if 0 /*
> + * This causes registers to become inaccessible during
> + * suspend. Need to figure out how to bring the controller
> + * back into life to issue a wakeup.
> + */
> + ctrl |= VHUB_CTRL_CLK_STOP_SUSPEND;
> +#endif
no commented code.
> + /*
> + * Set some ISO & split control bits according to Aspeed
> + * recommendation
> + *
> + * VHUB_CTRL_ISO_RSP_CTRL: When set tells the HW to respond
> + * with 0 bytes data packet to ISO IN endpoints when no data
> + * is available.
> + *
> + * VHUB_CTRL_SPLIT_IN: This makes a SOF complete a split IN
> + * transaction.
> + */
> + ctrl |= VHUB_CTRL_ISO_RSP_CTRL | VHUB_CTRL_SPLIT_IN;
> + writel(ctrl, vhub->regs + AST_VHUB_CTRL);
> + udelay(1);
> +
> + /* Set descriptor ring size */
> +#if AST_VHUB_DESCS_COUNT == 256
> + ctrl |= VHUB_CTRL_LONG_DESC;
> + writel(ctrl, vhub->regs + AST_VHUB_CTRL);
> +#elif AST_VHUB_DESCS_COUNT != 32
> + #error Invalid AST_VHUB_DESCS_COUNT
> +#endif
find a better way for this. No ifdefs
> +
> + /* Reset all devices */
> + writel(0x33f, vhub->regs + AST_VHUB_SW_REST);
no magic constants...
> + udelay(1);
> + writel(0, vhub->regs + AST_VHUB_SW_REST);
> +
> + /* Disable and cleanup EP ACK/NACK interrupts */
> + writel(0, vhub->regs + AST_VHUB_EP_ACK_IER);
> + writel(0, vhub->regs + AST_VHUB_EP_NACK_IER);
> + writel(0xffffffff, vhub->regs + AST_VHUB_EP_ACK_ISR);
> + writel(0xffffffff, vhub->regs + AST_VHUB_EP_NACK_ISR);
... of any kind
> + /* Default settings for EP0, enable HW hub EP1 */
> + writel(0, vhub->regs + AST_VHUB_EP0_CTRL);
> + writel(VHUB_EP1_CTRL_RESET_TOGGLE |
> + VHUB_EP1_CTRL_ENABLE,
> + vhub->regs + AST_VHUB_EP1_CTRL);
> + writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG);
> +
> + /* Configure EP0 DMA buffer */
> + writel(vhub->ep0.buf_dma, vhub->regs + AST_VHUB_EP0_DATA);
> +
> + /* Clear address */
> + writel(0, vhub->regs + AST_VHUB_CONF);
> +
> + /* Pullup hub (activate on host) */
> + if (vhub->force_usb1)
> + ctrl |= VHUB_CTRL_FULL_SPEED_ONLY;
> + ctrl |= VHUB_CTRL_UPSTREAM_CONNECT;
> + writel(ctrl, vhub->regs + AST_VHUB_CTRL);
> +
> + /* Enable some interrupts */
> + writel(VHUB_IRQ_HUB_EP0_IN_ACK_STALL |
> + VHUB_IRQ_HUB_EP0_OUT_ACK_STALL |
> + VHUB_IRQ_HUB_EP0_SETUP |
> + VHUB_IRQ_EP_POOL_ACK_STALL |
> + VHUB_IRQ_BUS_RESUME |
> + VHUB_IRQ_BUS_SUSPEND |
> + VHUB_IRQ_BUS_RESET,
> + vhub->regs + AST_VHUB_IER);
> +}
> +
> +static int ast_vhub_remove(struct platform_device *pdev)
> +{
> + struct ast_vhub *vhub = platform_get_drvdata(pdev);
> + unsigned long flags;
> + int i;
> +
> + if (!vhub || !vhub->regs)
> + return 0;
> +
> + /* Remove devices */
> + for (i = 0; i < AST_VHUB_NUM_PORTS; i++)
> + ast_vhub_del_dev(&vhub->ports[i].dev);
> +
> + spin_lock_irqsave(&vhub->lock, flags);
> +
> + /* Mask & ack all interrupts */
> + writel(0, vhub->regs + AST_VHUB_IER);
> + writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR);
> +
> + /* Pull device, leave PHY enabled */
> + writel(VHUB_CTRL_PHY_CLK |
> + VHUB_CTRL_PHY_RESET_DIS,
> + vhub->regs + AST_VHUB_CTRL);
> +
> + if (vhub->clk)
> + clk_disable_unprepare(vhub->clk);
> +
> + spin_unlock_irqrestore(&vhub->lock, flags);
> +
> + if (vhub->ep0_bufs)
> + dma_free_coherent(&pdev->dev,
> + AST_VHUB_EP0_MAX_PACKET *
> + (AST_VHUB_NUM_PORTS + 1),
> + vhub->ep0_bufs,
> + vhub->ep0_bufs_dma);
> + vhub->ep0_bufs = NULL;
> +
> + return 0;
> +}
> +
> +static int ast_vhub_probe(struct platform_device *pdev)
> +{
> + struct ast_vhub *vhub;
> + struct resource *res;
> + int i, rc = 0;
> +
> + vhub = devm_kzalloc(&pdev->dev, sizeof(*vhub), GFP_KERNEL);
> + if (!vhub)
> + return -ENOMEM;
> +
> + spin_lock_init(&vhub->lock);
> + vhub->pdev = pdev;
> + vhub->force_usb1 = force_usb1;
> + vhub->no_dma_desc = no_dma_desc;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + vhub->regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(vhub->regs)) {
> + dev_err(&pdev->dev, "Failed to map resources\n");
> + return PTR_ERR(vhub->regs);
> + }
> + UDCDBG(vhub, "vHub@%pR mapped @%p\n", res, vhub->regs);
> +
> + platform_set_drvdata(pdev, vhub);
> +
> + vhub->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(vhub->clk)) {
> + rc = PTR_ERR(vhub->clk);
> + goto err;
> + }
> + rc = clk_prepare_enable(vhub->clk);
> + if (rc) {
> + dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", rc);
> + goto err;
> + }
> +
> + /* Mask & ack all interrupts before installing the handler */
> + writel(0, vhub->regs + AST_VHUB_IER);
> + writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR);
> +
> + /* Find interrupt and install handler */
> + vhub->irq = platform_get_irq(pdev, 0);
> + if (vhub->irq < 0) {
> + dev_err(&pdev->dev, "Failed to get interrupt\n");
> + rc = vhub->irq;
> + goto err;
> + }
> + rc = devm_request_irq(&pdev->dev, vhub->irq, ast_vhub_irq, 0,
> + KBUILD_MODNAME, vhub);
we usually rely on the device name, but okay.
--
balbi
signature.asc
Description: PGP signature
