Am Dienstag, den 13.03.2018, 13:11 +0100 schrieb FRÉDÉRIC PARRENIN :
> Hi, 
> I ran "udevadm monitor -kup" (this command does not terminate) and then 
> "rmmod ipu3_cio2; modprobe ipu3_cio2", is that correct? 

Yes, it is correct and the command is not supposed to terminate.
It logs udev events.

> Below is the output of udevadm after rmmod/modprobe. 

According to this log, device nodes should exist. Can you check
again whether /dev/video* or /dev/media* exist?

If not this belongs probebly on linux-media.


To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to
More majordomo info at

Reply via email to