Hi,
On 2018-03-13 10:34, Li Jun wrote:
This patch add 2 APIs to get sink and source power config from firmware
description in case the port supports PD.
Signed-off-by: Li Jun <[email protected]>
---
drivers/usb/typec/tcpm.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
include/linux/usb/tcpm.h | 8 +++++---
2 files changed, 52 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
index 7500dc0..0bd34c9 100644
--- a/drivers/usb/typec/tcpm.c
+++ b/drivers/usb/typec/tcpm.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/proc_fs.h>
+#include <linux/property.h>
#include <linux/sched/clock.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
@@ -3595,6 +3596,52 @@ static int tcpm_copy_vdos(u32 *dest_vdo, const u32
*src_vdo,
return nr_vdo;
}
+int tcpm_get_src_config(struct fwnode_handle *fwnode, struct tcpc_config *tcfg)
+{
+ int ret;
+
+ if (!fwnode)
+ return -EINVAL;
+
+ ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
+ NULL, 0);
+ if (ret <= 0)
+ return -EINVAL;
+
+ tcfg->nr_src_pdo = min(ret, PDO_MAX_OBJECTS);
+ return fwnode_property_read_u32_array(fwnode, "source-pdos",
+ tcfg->src_pdo, tcfg->nr_src_pdo);
+}
+EXPORT_SYMBOL_GPL(tcpm_get_src_config);
+
+int tcpm_get_snk_config(struct fwnode_handle *fwnode, struct tcpc_config *tcfg)
+{
+ int ret;
+
+ if (!fwnode)
+ return -EINVAL;
+
+ if ((fwnode_property_read_u32(fwnode, "max-sink-microvolt",
+ &tcfg->max_snk_mv) < 0) ||
+ (fwnode_property_read_u32(fwnode, "max-sink-microamp",
+ &tcfg->max_snk_ma) < 0) ||
+ (fwnode_property_read_u32(fwnode, "max-sink-microwatt-hours",
+ &tcfg->max_snk_mw) < 0) ||
+ (fwnode_property_read_u32(fwnode, "op-sink-microwatt-hours",
+ &tcfg->operating_snk_mw) < 0))
If DT is changed to use micro instead of milli, these values needs to be
divided by 1000.
// Mats
+ return -EINVAL;
+
+ ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
+ NULL, 0);
+ if (ret <= 0)
+ return -EINVAL;
+
+ tcfg->nr_snk_pdo = min(ret, PDO_MAX_OBJECTS);
+ return fwnode_property_read_u32_array(fwnode, "sink-pdos",
+ tcfg->snk_pdo, tcfg->nr_snk_pdo);
+}
+EXPORT_SYMBOL_GPL(tcpm_get_snk_config);
+
int tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo,
unsigned int nr_pdo)
{
diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h
index e2e2db3..5d361f6 100644
--- a/include/linux/usb/tcpm.h
+++ b/include/linux/usb/tcpm.h
@@ -76,10 +76,10 @@ enum tcpm_transmit_type {
* @alt_modes: List of supported alternate modes
*/
struct tcpc_config {
- const u32 *src_pdo;
+ u32 *src_pdo;
unsigned int nr_src_pdo;
- const u32 *snk_pdo;
+ u32 *snk_pdo;
unsigned int nr_snk_pdo;
const u32 *snk_vdo;
@@ -143,7 +143,7 @@ enum tcpc_mux_mode {
* @mux: Pointer to multiplexer data
*/
struct tcpc_dev {
- const struct tcpc_config *config;
+ struct tcpc_config *config;
struct fwnode_handle *fwnode;
int (*init)(struct tcpc_dev *dev);
@@ -189,5 +189,7 @@ void tcpm_pd_transmit_complete(struct tcpm_port *port,
enum tcpm_transmit_status status);
void tcpm_pd_hard_reset(struct tcpm_port *port);
void tcpm_tcpc_reset(struct tcpm_port *port);
+int tcpm_get_src_config(struct fwnode_handle *fwnode, struct tcpc_config
*tcfg);
+int tcpm_get_snk_config(struct fwnode_handle *fwnode, struct tcpc_config
*tcfg);
#endif /* __LINUX_USB_TCPM_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
