Andrew, On 12/04/2018 15:16, Andrew Lunn wrote: > On Thu, Apr 12, 2018 at 02:55:34PM +0100, Phil Elwell wrote: >> Add two new Device Tree properties: >> * microchip,eee-enabled - a boolean to enable EEE >> * microchip,tx-lpi-timer - time in microseconds to wait after TX goes >> idle before entering the low power state >> (default 600) > > Hi Phil > > This looks wrong. > > What should happen is that the MAC driver calls phy_init_eee() to find > out if the PHY supports EEE. There should be no need to look in device > tree.
If the driver should be calling phy_init_eee to initialise EEE operation then I'm fine with that (although I notice that the TI cpsw calls phy_ethtool_set_eee but I don't see it calling phy_init_eee). However, it sounds like I need to keep my DT toggle of the EEE enablement and parameters downstream. Phil -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html