Commit 1b9ba000 ("Allow function drivers to pause control
transfers") states that USB_GADGET_DELAYED_STATUS is only
supported if data phase is 0 bytes.

It seems that when the length is not 0 bytes, there is no
need to explicitly delay the data stage since the transfer
is not completed until the user responds. However, when the
length is 0, there is no data stage and the transfer is
finished once setup() returns, hence there is a need to
explicitly delay completion.

This manifests as the following bugs:

Prior to 946ef68ad4e4 ('Let setup() return
USB_GADGET_DELAYED_STATUS'), when setup is 0 bytes, ffs
would require user to queue a 0 byte request in order to
clear setup state. However, that 0 byte request was actually
not needed and would hang and cause errors in other setup

After the above commit, 0 byte setups work since the gadget
now accepts empty queues to ep0 to clear the delay, but all
other setups hang.

Fixes: 946ef68ad4e4 ("Let setup() return USB_GADGET_DELAYED_STATUS")
Signed-off-by: Jerry Zhang <>
 drivers/usb/gadget/function/f_fs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_fs.c 
index 7d5b1c448eb2..4b2cb9d93176 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3271,7 +3271,7 @@ static int ffs_func_setup(struct usb_function *f,
        __ffs_event_add(ffs, FUNCTIONFS_SETUP);
        spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
+       return creq->wLength == 0 ? USB_GADGET_DELAYED_STATUS : 0;
 static bool ffs_func_req_match(struct usb_function *f,

To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to
More majordomo info at

Reply via email to