The Microchip LAN78XX family of devices are Ethernet controllers with
a USB interface. Despite being discoverable devices it can be useful to
be able to configure them from Device Tree, particularly in low-cost
applications without an EEPROM or programmed OTP.
Document the supported properties in a bindings file.
Signed-off-by: Phil Elwell <p...@raspberrypi.org>
---
.../devicetree/bindings/net/microchip,lan78xx.txt | 54 ++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/microchip,lan78xx.txt
diff --git a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
new file mode 100644
index 0000000..a5d701b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
@@ -0,0 +1,54 @@
+Microchip LAN78xx Gigabit Ethernet controller
+
+The LAN78XX devices are usually configured by programming their OTP or with
+an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
+The Device Tree properties, if present, override the OTP and EEPROM.
+
+Required properties:
+- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
+
+Optional properties:
+- local-mac-address: see ethernet.txt
+- mac-address: see ethernet.txt
+
+Optional properties of the embedded PHY:
+- microchip,led-modes: a 0..4 element vector, with each element configuring
+ the operating mode of an LED. Omitted LEDs are turned off. Allowed values
+ are defined in "include/dt-bindings/net/microchip-lan78xx.h".
+
+Example:
+
+/* Based on the configuration for a Raspberry Pi 3 B+ */
+&usb {
+ usb1@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb1_1@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: usbether@1 {
+ compatible = "usb424,7800";
+ reg = <1>;
+ local-mac-address = [ 00 11 22 33 44 55 ];
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ eth_phy: ethernet-phy@1 {
+ reg = <1>;
+ microchip,led-modes = <
+
LAN78XX_LINK_1000_ACTIVITY
+
LAN78XX_LINK_10_100_ACTIVITY
+ >;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 23735d9..91cb961 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14572,6 +14572,7 @@ M: Woojung Huh <woojung....@microchip.com>
M: Microchip Linux Driver Support <unglinuxdri...@microchip.com>
L: net...@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/net/microchip,lan78xx.txt
F: drivers/net/usb/lan78xx.*
F: include/dt-bindings/net/microchip-lan78xx.h
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
