Hi Jianguo,

On Fri, 2018-05-04 at 17:20 +0800, [email protected] wrote:
> From: Jianguo Sun <[email protected]>
> 
> This commit adds support for HiSilicon STB xHCI host controller.
> 
> Signed-off-by: Jianguo Sun <[email protected]>
> ---
>  drivers/usb/host/Kconfig      |   7 +
>  drivers/usb/host/Makefile     |   1 +
>  drivers/usb/host/xhci-histb.c | 409 
> ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 417 insertions(+)
>  create mode 100644 drivers/usb/host/xhci-histb.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 5d958da..c813fc4 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -52,6 +52,13 @@ config USB_XHCI_PLATFORM
>  
>         If unsure, say N.
>  
> +config USB_XHCI_HISTB
> +     tristate "xHCI support for HiSilicon STB SoCs"
> +     depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST)
> +     help
> +       Say 'Y' to enable the support for the xHCI host controller
> +       found in HiSilicon STB SoCs.
> +
>  config USB_XHCI_MTK
>       tristate "xHCI support for MediaTek SoCs"
>       select MFD_SYSCON
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 8a8cffe..9b669c9 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -74,6 +74,7 @@ obj-$(CONFIG_USB_FHCI_HCD)  += fhci.o
>  obj-$(CONFIG_USB_XHCI_HCD)   += xhci-hcd.o
>  obj-$(CONFIG_USB_XHCI_PCI)   += xhci-pci.o
>  obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
> +obj-$(CONFIG_USB_XHCI_HISTB) += xhci-histb.o
>  obj-$(CONFIG_USB_XHCI_MTK)   += xhci-mtk.o
>  obj-$(CONFIG_USB_XHCI_TEGRA) += xhci-tegra.o
>  obj-$(CONFIG_USB_SL811_HCD)  += sl811-hcd.o
> diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c
> new file mode 100644
> index 0000000..5ec549f
> --- /dev/null
> +++ b/drivers/usb/host/xhci-histb.c
> @@ -0,0 +1,409 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * xHCI host controller driver for HiSilicon STB SoCs
> + *
> + * Copyright (C) 2017-2018 HiSilicon Co., Ltd. http://www.hisilicon.com
> + *
> + * Authors: Jianguo Sun <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
No need anymore if SPDX-License-Identifier is provided
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
Not used
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
ditto
> +#include <linux/reset.h>
> +
> +#include "xhci.h"
> +
> +#define GTXTHRCFG            0xc108
> +#define GRXTHRCFG            0xc10c
> +#define REG_GUSB2PHYCFG0     0xc200
> +#define BIT_UTMI_8_16                BIT(3)
> +#define BIT_UTMI_ULPI                BIT(4)
> +#define BIT_FREECLK_EXIST    BIT(30)
> +
> +#define REG_GUSB3PIPECTL0    0xc2c0
> +#define USB3_DEEMPHASIS_MASK GENMASK(2, 1)
> +#define USB3_DEEMPHASIS0     BIT(1)
> +#define USB3_TX_MARGIN1              BIT(4)
> +
> +struct xhci_hcd_histb {
> +     struct device           *dev;
> +     struct usb_hcd          *hcd;
> +     void __iomem            *ctrl;
> +     struct clk              *bus_clk;
> +     struct clk              *utmi_clk;
> +     struct clk              *pipe_clk;
> +     struct clk              *suspend_clk;
> +     struct reset_control    *soft_reset;
> +};
> +
> +static inline struct xhci_hcd_histb *hcd_to_histb(struct usb_hcd *hcd)
> +{
> +     return dev_get_drvdata(hcd->self.controller);
> +}
> +
> +static int xhci_histb_config(struct xhci_hcd_histb *histb)
> +{
> +     struct device_node *np = histb->dev->of_node;
> +     u32 regval;
> +
> +     if (of_property_match_string(np, "phys-names", "inno") >= 0) {
> +             /* USB2 PHY chose ulpi 8bit interface */
> +             regval = readl(histb->ctrl + REG_GUSB2PHYCFG0);
> +             regval &= ~BIT_UTMI_ULPI;
> +             regval &= ~(BIT_UTMI_8_16);
> +             regval &= ~BIT_FREECLK_EXIST;
> +             writel(regval, histb->ctrl + REG_GUSB2PHYCFG0);
> +     }
> +
> +     if (of_property_match_string(np, "phys-names", "combo") >= 0) {
> +             /*
> +              * write 0x010c0012 to GUSB3PIPECTL0
> +              * GUSB3PIPECTL0[5:3] = 010 : Tx Margin = 900mV ,
> +              * decrease TX voltage
> +              * GUSB3PIPECTL0[2:1] = 01 : Tx Deemphasis = -3.5dB,
> +              * refer to xHCI spec
> +              */
> +             regval = readl(histb->ctrl + REG_GUSB3PIPECTL0);
> +             regval &= ~USB3_DEEMPHASIS_MASK;
> +             regval |= USB3_DEEMPHASIS0;
> +             regval |= USB3_TX_MARGIN1;
> +             writel(regval, histb->ctrl + REG_GUSB3PIPECTL0);
> +     }
> +
> +     writel(0x23100000, histb->ctrl + GTXTHRCFG);
> +     writel(0x23100000, histb->ctrl + GRXTHRCFG);
> +
> +     return 0;
> +}
> +
> +static int xhci_histb_clks_get(struct xhci_hcd_histb *histb)
> +{
> +     struct device *dev = histb->dev;
> +
> +     histb->bus_clk = devm_clk_get(dev, "bus");
> +     if (IS_ERR(histb->bus_clk)) {
> +             dev_err(dev, "fail to get bus clk\n");
> +             return PTR_ERR(histb->bus_clk);
> +     }
> +
> +     histb->utmi_clk = devm_clk_get(dev, "utmi");
> +     if (IS_ERR(histb->utmi_clk)) {
> +             dev_err(dev, "fail to get utmi clk\n");
> +             return PTR_ERR(histb->utmi_clk);
> +     }
> +
> +     histb->pipe_clk = devm_clk_get(dev, "pipe");
> +     if (IS_ERR(histb->pipe_clk)) {
> +             dev_err(dev, "fail to get pipe clk\n");
> +             return PTR_ERR(histb->pipe_clk);
> +     }
> +
> +     histb->suspend_clk = devm_clk_get(dev, "suspend");
> +     if (IS_ERR(histb->suspend_clk)) {
> +             dev_err(dev, "fail to get suspend clk\n");
> +             return PTR_ERR(histb->suspend_clk);
> +     }
> +
> +     return 0;
> +}
> +
> +static int xhci_histb_host_enable(struct xhci_hcd_histb *histb)
> +{
> +     int ret;
> +
> +     ret = clk_prepare_enable(histb->bus_clk);
> +     if (ret) {
> +             dev_err(histb->dev, "failed to enable bus clk\n");
> +             return ret;
> +     }
> +
> +     ret = clk_prepare_enable(histb->utmi_clk);
> +     if (ret) {
> +             dev_err(histb->dev, "failed to enable utmi clk\n");
> +             goto err_utmi_clk;
> +     }
> +
> +     ret = clk_prepare_enable(histb->pipe_clk);
> +     if (ret) {
> +             dev_err(histb->dev, "failed to enable pipe clk\n");
> +             goto err_pipe_clk;
> +     }
> +
> +     ret = clk_prepare_enable(histb->suspend_clk);
> +     if (ret) {
> +             dev_err(histb->dev, "failed to enable suspend clk\n");
> +             goto err_suspend_clk;
> +     }
> +
> +     reset_control_deassert(histb->soft_reset);
> +
> +     return 0;
> +
> +err_suspend_clk:
> +     clk_disable_unprepare(histb->pipe_clk);
> +err_pipe_clk:
> +     clk_disable_unprepare(histb->utmi_clk);
> +err_utmi_clk:
> +     clk_disable_unprepare(histb->bus_clk);
> +
> +     return ret;
> +}
> +
> +static void xhci_histb_host_disable(struct xhci_hcd_histb *histb)
> +{
> +     reset_control_assert(histb->soft_reset);
> +
> +     clk_disable_unprepare(histb->suspend_clk);
> +     clk_disable_unprepare(histb->pipe_clk);
> +     clk_disable_unprepare(histb->utmi_clk);
> +     clk_disable_unprepare(histb->bus_clk);
> +}
> +
> +static void xhci_histb_quirks(struct device *dev, struct xhci_hcd *xhci)
> +{
> +     /*
> +      * As of now platform drivers don't provide MSI support so we ensure
> +      * here that the generic code does not try to make a pci_dev from our
> +      * dev struct in order to setup MSI
> +      */
> +     xhci->quirks |= XHCI_PLAT;
> +}
> +
> +/* called during probe() after chip reset completes */
> +static int xhci_histb_setup(struct usb_hcd *hcd)
> +{
> +     struct xhci_hcd_histb *histb = hcd_to_histb(hcd);
> +     int ret;
> +
> +     if (usb_hcd_is_primary_hcd(hcd)) {
> +             ret = xhci_histb_config(histb);
> +             if (ret)
> +                     return ret;
> +     }
> +
> +     ret = xhci_gen_setup(hcd, xhci_histb_quirks);
> +     if (ret)
> +             return ret;
no need test @ret here
> +
> +     return ret;
> +}
> +
> +static const struct xhci_driver_overrides xhci_histb_overrides __initconst = 
> {
> +     .reset = xhci_histb_setup,
> +};
> +
> +static struct hc_driver __read_mostly xhci_histb_hc_driver;
> +static int xhci_histb_probe(struct platform_device *pdev)
> +{
> +     struct device *dev = &pdev->dev;
> +     struct xhci_hcd_histb *histb;
> +     const struct hc_driver *driver;
> +     struct usb_hcd *hcd;
> +     struct xhci_hcd *xhci;
> +     struct resource *res;
> +     int irq;
> +     int ret = -ENODEV;
> +
> +     if (usb_disabled())
> +             return -ENODEV;
> +
> +     driver = &xhci_histb_hc_driver;
> +     histb = devm_kzalloc(dev, sizeof(*histb), GFP_KERNEL);
> +     if (!histb)
> +             return -ENOMEM;
> +
> +     histb->dev = dev;
> +
> +     irq = platform_get_irq(pdev, 0);
> +     if (irq < 0)
> +             return irq;
> +
> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +     histb->ctrl = devm_ioremap_resource(&pdev->dev, res);
> +     if (IS_ERR(histb->ctrl))
> +             return PTR_ERR(histb->ctrl);
> +
> +     ret = xhci_histb_clks_get(histb);
> +     if (ret)
> +             return ret;
> +
> +     histb->soft_reset = devm_reset_control_get(dev, "soft");
> +     if (IS_ERR(histb->soft_reset)) {
> +             dev_err(dev, "failed to get soft reset\n");
> +             return PTR_ERR(histb->soft_reset);
> +     }
> +
> +     pm_runtime_enable(dev);
> +     pm_runtime_get_sync(dev);
> +     device_enable_async_suspend(dev);
> +
> +     /* Initialize dma_mask and coherent_dma_mask to 32-bits */
> +     ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> +     if (ret)
> +             return ret;
> +
> +     hcd = usb_create_hcd(driver, dev, dev_name(dev));
> +     if (!hcd) {
> +             ret = -ENOMEM;
> +             goto disable_pm;
> +     }
> +
> +     hcd->regs = histb->ctrl;
> +     hcd->rsrc_start = res->start;
> +     hcd->rsrc_len = resource_size(res);
> +
> +     histb->hcd = hcd;
> +     dev_set_drvdata(hcd->self.controller, histb);
> +
> +     ret = xhci_histb_host_enable(histb);
> +     if (ret)
> +             goto put_hcd;
> +
> +     xhci = hcd_to_xhci(hcd);
> +
> +     device_wakeup_enable(hcd->self.controller);
> +
> +     xhci->main_hcd = hcd;
> +     xhci->shared_hcd = usb_create_shared_hcd(driver, dev, dev_name(dev),
> +                                              hcd);
> +     if (!xhci->shared_hcd) {
> +             ret = -ENOMEM;
> +             goto disable_host;
> +     }
> +
> +     ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> +     if (ret)
> +             goto put_usb3_hcd;
> +
> +     if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
> +             xhci->shared_hcd->can_do_streams = 1;
> +
> +     ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
> +     if (ret)
> +             goto dealloc_usb2_hcd;
> +
> +     device_enable_async_suspend(dev);
> +     pm_runtime_put_noidle(dev);
> +
> +     /*
> +      * Prevent runtime pm from being on as default, users should enable
> +      * runtime pm using power/control in sysfs.
> +      */
> +     pm_runtime_forbid(dev);
> +
Are you sure make use of the default value xhci->imod_interval == 0 ?

> +     return 0;
> +
> +dealloc_usb2_hcd:
> +     usb_remove_hcd(hcd);
> +put_usb3_hcd:
> +     usb_put_hcd(xhci->shared_hcd);
> +disable_host:
> +     xhci_histb_host_disable(histb);
> +put_hcd:
> +     usb_put_hcd(hcd);
> +disable_pm:
> +     pm_runtime_put_sync(dev);
> +     pm_runtime_disable(dev);
> +
> +     return ret;
> +}
> +
> +static int xhci_histb_remove(struct platform_device *dev)
> +{
> +     struct xhci_hcd_histb *histb = platform_get_drvdata(dev);
> +     struct usb_hcd *hcd = histb->hcd;
> +     struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> +
> +     xhci->xhc_state |= XHCI_STATE_REMOVING;
> +
> +     usb_remove_hcd(xhci->shared_hcd);
> +     device_wakeup_disable(&dev->dev);
> +
> +     usb_remove_hcd(hcd);
> +     usb_put_hcd(xhci->shared_hcd);
> +
> +     xhci_histb_host_disable(histb);
> +     usb_put_hcd(hcd);
> +     pm_runtime_put_sync(&dev->dev);
> +     pm_runtime_disable(&dev->dev);
> +
> +     return 0;
> +}
> +
> +static int __maybe_unused xhci_histb_suspend(struct device *dev)
> +{
> +     struct xhci_hcd_histb *histb = dev_get_drvdata(dev);
> +     struct usb_hcd *hcd = histb->hcd;
> +     struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> +     int ret;
> +
> +     ret = xhci_suspend(xhci, device_may_wakeup(dev));
> +
> +     if (!device_may_wakeup(dev))
> +             xhci_histb_host_disable(histb);
> +
> +     return ret;
> +}
> +
> +static int __maybe_unused xhci_histb_resume(struct device *dev)
> +{
> +     struct xhci_hcd_histb *histb = dev_get_drvdata(dev);
> +     struct usb_hcd *hcd = histb->hcd;
> +     struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> +
> +     if (!device_may_wakeup(dev))
> +             xhci_histb_host_enable(histb);
> +
> +     return xhci_resume(xhci, 0);
> +}
> +
> +static const struct dev_pm_ops xhci_histb_pm_ops = {
> +     SET_SYSTEM_SLEEP_PM_OPS(xhci_histb_suspend, xhci_histb_resume)
> +};
> +#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_histb_pm_ops : NULL)
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id histb_xhci_of_match[] = {
> +     { .compatible = "hisilicon,hi3798cv200-xhci"},
> +     { },
> +};
> +MODULE_DEVICE_TABLE(of, histb_xhci_of_match);
> +#endif
> +
> +static struct platform_driver histb_xhci_driver = {
> +     .probe  = xhci_histb_probe,
> +     .remove = xhci_histb_remove,
> +     .driver = {
> +             .name = "xhci-histb",
> +             .pm = DEV_PM_OPS,
> +             .of_match_table = of_match_ptr(histb_xhci_of_match),
> +     },
> +};
> +MODULE_ALIAS("platform:xhci-histb");
> +
> +static int __init xhci_histb_init(void)
> +{
> +     xhci_init_driver(&xhci_histb_hc_driver, &xhci_histb_overrides);
> +     return platform_driver_register(&histb_xhci_driver);
> +}
> +module_init(xhci_histb_init);
> +
> +static void __exit xhci_histb_exit(void)
> +{
> +     platform_driver_unregister(&histb_xhci_driver);
> +}
> +module_exit(xhci_histb_exit);
> +
> +MODULE_DESCRIPTION("HiSilicon STB xHCI Host Controller Driver");
> +MODULE_LICENSE("GPL v2");


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to