Hi,
On Thu, Jul 26, 2018 at 12:52:53PM +0000, Alexey Spirkov wrote:
> Existing code is not applicable to big-endian machines
> ctrlrequest fields received in USB endian - i.e. in little-endian
> and should be converted to cpu endianness before usage.
>
> Signed-off-by: Alexey Spirkov <[email protected]>
> ---
> drivers/usb/musb/musb_gadget_ep0.c | 33 ++++++++++++++++++++-------------
> 1 file changed, 20 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/usb/musb/musb_gadget_ep0.c
> b/drivers/usb/musb/musb_gadget_ep0.c
> index 91a5027..5d5c933 100644
> --- a/drivers/usb/musb/musb_gadget_ep0.c
> +++ b/drivers/usb/musb/musb_gadget_ep0.c
> @@ -82,7 +82,7 @@ static int service_tx_status_request(
> u16 tmp;
> void __iomem *regs;
>
> - epnum = (u8) ctrlrequest->wIndex;
> + epnum = (u8) le16_to_cpu(ctrlrequest->wIndex);
> if (!epnum) {
> result[0] = 0;
> break;
> @@ -217,14 +217,15 @@ __acquires(musb->lock)
> case USB_REQ_SET_ADDRESS:
> /* change it after the status stage */
> musb->set_address = true;
> - musb->address = (u8) (ctrlrequest->wValue & 0x7f);
> + musb->address = (u8) (le16_to_cpu(ctrlrequest->wValue) &
> + 0x7f);
> handled = 1;
> break;
>
> case USB_REQ_CLEAR_FEATURE:
> switch (recip) {
> case USB_RECIP_DEVICE:
> - if (ctrlrequest->wValue
> + if (le16_to_cpu(ctrlrequest->wValue)
> != USB_DEVICE_REMOTE_WAKEUP)
> break;
> musb->may_wakeup = 0;
> @@ -234,7 +235,7 @@ __acquires(musb->lock)
> break;
> case USB_RECIP_ENDPOINT:{
> const u8 epnum =
> - ctrlrequest->wIndex & 0x0f;
> + le16_to_cpu(ctrlrequest->wIndex) & 0x0f;
> struct musb_ep *musb_ep;
> struct musb_hw_ep *ep;
> struct musb_request *request;
> @@ -243,12 +244,14 @@ __acquires(musb->lock)
> u16 csr;
>
> if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
> - ctrlrequest->wValue != USB_ENDPOINT_HALT)
> + le16_to_cpu(ctrlrequest->wValue)
> + != USB_ENDPOINT_HALT)
> break;
>
> ep = musb->endpoints + epnum;
> regs = ep->regs;
> - is_in = ctrlrequest->wIndex & USB_DIR_IN;
> + is_in = le16_to_cpu(ctrlrequest->wIndex) &
> + USB_DIR_IN;
> if (is_in)
> musb_ep = &ep->ep_in;
> else
> @@ -300,17 +303,19 @@ __acquires(musb->lock)
> switch (recip) {
> case USB_RECIP_DEVICE:
> handled = 1;
> - switch (ctrlrequest->wValue) {
> + switch (le16_to_cpu(ctrlrequest->wValue)) {
> case USB_DEVICE_REMOTE_WAKEUP:
> musb->may_wakeup = 1;
> break;
> case USB_DEVICE_TEST_MODE:
> if (musb->g.speed != USB_SPEED_HIGH)
> goto stall;
> - if (ctrlrequest->wIndex & 0xff)
> + if (le16_to_cpu(ctrlrequest->wIndex) &
> + 0xff)
> goto stall;
>
> - switch (ctrlrequest->wIndex >> 8) {
> + switch (le16_to_cpu(ctrlrequest->wIndex)
> + >> 8) {
> case 1:
> pr_debug("TEST_J\n");
> /* TEST_J */
> @@ -399,7 +404,7 @@ __acquires(musb->lock)
>
> case USB_RECIP_ENDPOINT:{
> const u8 epnum =
> - ctrlrequest->wIndex & 0x0f;
> + le16_to_cpu(ctrlrequest->wIndex) & 0x0f;
> struct musb_ep *musb_ep;
> struct musb_hw_ep *ep;
> void __iomem *regs;
> @@ -407,12 +412,14 @@ __acquires(musb->lock)
> u16 csr;
>
> if (epnum == 0 || epnum >= MUSB_C_NUM_EPS ||
> - ctrlrequest->wValue != USB_ENDPOINT_HALT)
> + le16_to_cpu(ctrlrequest->wValue)
> + != USB_ENDPOINT_HALT)
> break;
>
> ep = musb->endpoints + epnum;
> regs = ep->regs;
> - is_in = ctrlrequest->wIndex & USB_DIR_IN;
> + is_in = le16_to_cpu(ctrlrequest->wIndex) &
> + USB_DIR_IN;
> if (is_in)
> musb_ep = &ep->ep_in;
> else
Since this function uses ctrlrequest->wIndex and ctrlrequest->wValue
many times, can you please create local vars for them, then we don't
have to call le16_to_cpu() on them in every instance?
> @@ -608,7 +615,7 @@ musb_read_setup(struct musb *musb, struct usb_ctrlrequest
> *req)
> */
> musb->set_address = false;
> musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
> - if (req->wLength == 0) {
> + if (le16_to_cpu(req->wLength) == 0) {
> if (req->bRequestType & USB_DIR_IN)
> musb->ackpend |= MUSB_CSR0_TXPKTRDY;
> musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
Regards,
-Bin.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
