Add compatibility for extcon-usb-gpio which can handle more
than one cable per instance, allowing coherency of USB cable
states (USB/USB-HOST). These states can be generated from ID
or/and VBUS pins.
In case only one extcon device is associated to the USB device,
and this device supports USB and USB-HOST cable states, we now
use it for both VBUS (USB) and ID (USB-HOST) notifier.
Signed-off-by: Loic Poulain <loic.poul...@linaro.org>
---
drivers/usb/chipidea/core.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 03e52fc..c595718 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -699,6 +699,17 @@ static int ci_get_platdata(struct device *dev,
ext_id = extcon_get_edev_by_phandle(dev, 1);
if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
return PTR_ERR(ext_id);
+
+ /*
+ * Some extcon devices like extcon-usb-gpio have only one
+ * instance for both USB and USB-HOST cable states.
+ */
+ if (!IS_ERR(ext_vbus) && IS_ERR(ext_id)) {
+ if (extcon_get_state(ext_vbus, EXTCON_USB) >= 0 &&
+ extcon_get_state(ext_vbus, EXTCON_USB_HOST) >= 0) {
+ ext_id = ext_vbus;
+ }
+ }
}
cable = &platdata->vbus_extcon;
--
2.7.4
