Hi Andy
> > > Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C
> > > controller which can be accessed over I2C.
> > > + val &= ~(I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_GEN_STOP
> > > + | I2C_MST_CNTL_GEN_RAB);
> >
> > "|" should be on previous line to follow common style in this module.
> The "|" here is to clear the bit together. [val &= ~(X | Y | Z)] Style in
> this
> module is still followed. Please see first line which does "|" to val.
Ok, I got your point of putting "|" on line above and will fix it.
Thanks
Ajay
--
nvpublic
--
>
> > > + writel(val, i2cd->regs + I2C_MST_CNTL);
> > > +
> > > + return i2c_check_status(i2cd); }
> > > +
> > > +static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
> > > + struct i2c_msg *msgs, int num) {
> > > + struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
> > > + struct device *dev = i2cd->dev;
> > > + int status;
> > > + int i, j;
> >
