Hi, Thomas JOURDAN <[email protected]> writes: >> > From your trace.txt, I don't see the early enumeration phase, so I can't >> > comment one what happened during that time. Care to rerun this so that >> > we have early enumeration? I need to see a Reset Event on the trace as >> > that's the first event when you first plug your usb cable. >> >> I don't know why it isn't there because I plugged the cable *after* I >> enabled the tracing. So I ran it a second time and despite the traces
Ok, so HW itself negotiated HS instead of SS. Note that below ep0 max
packet size is set ot 64.
irq/13-dwc3-894 [001] d... 250.891132: dwc3_event: event (00000101):
Reset [U0]
irq/13-dwc3-894 [001] d... 250.941068: dwc3_event: event (00000201):
Connection Done [U0]
irq/13-dwc3-894 [001] d... 250.941090: dwc3_gadget_ep_cmd: ep0out: cmd
'Set Endpoint Configuration' [1025] params 80000200 00000500 00000000 -->
status: Successful
irq/13-dwc3-894 [001] d... 250.941095: dwc3_gadget_ep_enable: ep0out:
mps 64/512 streams 0 burst 1 ring 0/0 flags E:swBp:e:>
irq/13-dwc3-894 [001] d... 250.941103: dwc3_gadget_ep_cmd: ep0in: cmd
'Set Endpoint Configuration' [1025] params 80000200 02000500 00000000 -->
status: Successful
irq/13-dwc3-894 [001] d... 250.941106: dwc3_gadget_ep_enable: ep0in:
mps 64/512 streams 0 burst 1 ring 0/0 flags E:swbp:e:<
Would you have a usb sniffer to see if the link even attempts to run Rx
termination detection?
Another thing to try is setting both of the quirks below:
snps,dis_u3_susphy_quirk
snps,dis_u2_susphy_quirk
Gadget debug won't be necessary as it won't bring much new info.
--
balbi
signature.asc
Description: PGP signature
