Support the option to disable USB2 LPM. Set xhci "usb2-lpm-disable"
property via "snps,usb2-lpm-disable" property.
Signed-off-by: Thinh Nguyen <thi...@synopsys.com>
---
drivers/usb/dwc3/core.c | 2 ++
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/host.c | 5 ++++-
3 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index a4068a7b95dd..f6b80a545a78 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1248,6 +1248,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
&hird_threshold);
dwc->usb3_lpm_capable = device_property_read_bool(dev,
"snps,usb3_lpm_capable");
+ dwc->usb2_lpm_disable = device_property_read_bool(dev,
+ "snps,usb2-lpm-disable");
device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd",
&rx_thr_num_pkt_prd);
device_property_read_u8(dev, "snps,rx-max-burst-prd",
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 5bfb62533e0f..ca7b5f46e1f0 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -971,6 +971,7 @@ struct dwc3_scratchpad_array {
* @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
* @three_stage_setup: set if we perform a three phase setup
* @usb3_lpm_capable: set if hadrware supports Link Power Management
+ * @usb2_lpm_disable: set to disable usb2 lpm
* @disable_scramble_quirk: set if we enable the disable scramble quirk
* @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
* @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
@@ -1146,6 +1147,7 @@ struct dwc3 {
unsigned setup_packet_pending:1;
unsigned three_stage_setup:1;
unsigned usb3_lpm_capable:1;
+ unsigned usb2_lpm_disable:1;
unsigned disable_scramble_quirk:1;
unsigned u2exit_lfps_quirk:1;
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 1a3878a3be78..f55947294f7c 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -46,7 +46,7 @@ static int dwc3_host_get_irq(struct dwc3 *dwc)
int dwc3_host_init(struct dwc3 *dwc)
{
- struct property_entry props[3];
+ struct property_entry props[4];
struct platform_device *xhci;
int ret, irq;
struct resource *res;
@@ -93,6 +93,9 @@ int dwc3_host_init(struct dwc3 *dwc)
if (dwc->usb3_lpm_capable)
props[prop_idx++].name = "usb3-lpm-capable";
+ if (dwc->usb2_lpm_disable)
+ props[prop_idx++].name = "usb2-lpm-disable";
+
/**
* WORKAROUND: dwc3 revisions <=3.00a have a limitation
* where Port Disable command doesn't work.
--
2.11.0
