Sorry, please ignore this. Used incorrect Vinod email address.
On Mon, Nov 12, 2018 at 09:40:49AM -0600, Bin Liu wrote:
> The driver defines three states for a cppi channel.
> - idle: .chan_busy == 0 && not in .pending list
> - pending: .chan_busy == 0 && in .pending list
> - busy: .chan_busy == 1 && not in .pending list
>
> There are cases in which the cppi channel could be in the pending state
> when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend()
> is called.
>
> cppi41_stop_chan() has a bug for these cases to set channels to idle state.
> It only checks the .chan_busy flag, but not the .pending list, then later
> when cppi41_runtime_resume() is called the channels in .pending list will
> be transitioned to busy state.
>
> Removing channels from the .pending list solves the problem.
>
> Fixes: 975faaeb9985 ("dma: cppi41: start tear down only if channel is busy")
> Cc: [email protected] # v3.15+
> Signed-off-by: Bin Liu <[email protected]>
> ---
> drivers/dma/ti/cppi41.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/dma/ti/cppi41.c b/drivers/dma/ti/cppi41.c
> index 1497da367710..e507ec36c0d3 100644
> --- a/drivers/dma/ti/cppi41.c
> +++ b/drivers/dma/ti/cppi41.c
> @@ -723,8 +723,22 @@ static int cppi41_stop_chan(struct dma_chan *chan)
>
> desc_phys = lower_32_bits(c->desc_phys);
> desc_num = (desc_phys - cdd->descs_phys) / sizeof(struct cppi41_desc);
> - if (!cdd->chan_busy[desc_num])
> + if (!cdd->chan_busy[desc_num]) {
> + struct cppi41_channel *cc, *_ct;
> +
> + /*
> + * channels might still be in the pendling list if
> + * cppi41_dma_issue_pending() is called after
> + * cppi41_runtime_suspend() is called
> + */
> + list_for_each_entry_safe(cc, _ct, &cdd->pending, node) {
> + if (cc != c)
> + continue;
> + list_del(&cc->node);
> + break;
> + }
> return 0;
> + }
>
> ret = cppi41_tear_down_chan(c);
> if (ret)
> --
> 2.17.1
>
