Le 27/11/2018 à 16:19, mario.limoncie...@dell.com a écrit :
Some news from today.
I realized that I was not always restarting the computer when changing
the Mac pass-through setting in the BIOS.
Sometimes I was just hibernating, and this could be the origin of some
failures.
OK. Great.
The second usbc dongle works again so there was no permanent change to
the device.
But Mac pass-through does not work for this device (even from a fresh
restart with no dock connected). This is what I get when connecting it:
Nov 27 11:06:53 latitude5285 kernel: [ 61.796105] usb 2-1: new
SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Nov 27 11:06:53 latitude5285 kernel: [ 61.816686] usb 2-1: New USB
device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
Nov 27 11:06:53 latitude5285 kernel: [ 61.816688] usb 2-1: New USB
device strings: Mfr=1, Product=2, SerialNumber=6
Nov 27 11:06:53 latitude5285 kernel: [ 61.816688] usb 2-1: Product:
USB 10/100/1000 LAN
Nov 27 11:06:53 latitude5285 kernel: [ 61.816689] usb 2-1:
Manufacturer: Realtek
Nov 27 11:06:53 latitude5285 kernel: [ 61.816690] usb 2-1:
SerialNumber: 000001
Nov 27 11:06:53 latitude5285 kernel: [ 61.835060] usbcore: registered
new interface driver r8152
Nov 27 11:06:53 latitude5285 kernel: [ 61.837654] usbcore: registered
new interface driver cdc_ether
Nov 27 11:06:53 latitude5285 kernel: [ 61.964264] usb 2-1: reset
SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Nov 27 11:06:53 latitude5285 kernel: [ 62.016553] r8152 2-1:1.0 eth0:
v1.09.9
Nov 27 11:06:53 latitude5285 kernel: [ 62.021108] r8152 2-1:1.0
enx00e04c68035e: renamed from eth0
Nov 27 11:06:53 latitude5285 kernel: [ 62.041086] IPv6:
ADDRCONF(NETDEV_UP): enx00e04c68035e: link is not ready
Nov 27 11:06:53 latitude5285 kernel: [ 62.045852] IPv6:
ADDRCONF(NETDEV_UP): enx00e04c68035e: link is not ready
Did you have the debugging patch applied and the dynamic debugging properly
enabled during this time?
Yes
I don't see any lines related to the MAC pass through failures here.
And to be clear - was this particular dongle ever working for MAC pass through?
I don't know, I never tested it on windows.
