Hello Peter,
On Tue, Dec 04, 2018 at 06:19:11AM +0000, PETER CHEN wrote:
> > diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c
> > b/drivers/usb/chipidea/ci_hdrc_imx.c
> > index 80b4e4ef9b68..3dcfd0d97f94 100644
> > --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> > +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> > @@ -141,6 +141,8 @@ static struct imx_usbmisc_data
> > *usbmisc_get_init_data(struct device *dev)
> > } else if (of_find_property(np, "over-current-active-low", NULL)) {
> > data->oc_pol_active_low = 1;
> > data->oc_pol_configured = 1;
> > + } else {
> > + dev_warn(dev, "No over current polarity defined\n");
> > }
>
> If the platform doesn't support OC, the polarity setting is not needed. You
> could consider
> getting polarity property only "disable-over-current" is not found at patch 1.
Right, just fixed that up and will send out v3 in a moment.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
