> Some SoC/IP as STM32F469, the snpsid can only be read after clock is > enabled, otherwise it will read as 0, and the dwc2_check_core_endianness > will assume the core and AHB have opposite endianness, leading to the > following error: > > [ 1.976339] dwc2 50000000.usb: 50000000.usb supply vusb_d not found, using > dummy regulator > [ 1.986124] dwc2 50000000.usb: Linked as a consumer to regulator.0 > [ 1.992711] dwc2 50000000.usb: 50000000.usb supply vusb_a not found, using > dummy regulator > [ 2.003672] dwc2 50000000.usb: dwc2_core_reset: HANG! AHB Idle timeout > GRSTCTL GRSTCTL_AHBIDLE > [ 2.015176] dwc2: probe of 50000000.usb failed with error -16 > > The proposed patch changes the location where dwc2_check_core_endianness > is called, allowing the clock peripheral to be enabled first. > > Signed-off-by: Bruno Meirelles Herrera <[email protected]> Tested-by: Martin Blumenstingl <[email protected]>
This fixes the same error on my Odroid-C1 (Meson8b SoC). Thank you for spotting and fixing this! Regards Martin
