I cant put my finger on it but this seems wrong. As i said both src and sink 
should never be true at the same time. I also din’t understand why turning off 
src should power off your board. Ultimately my concern is that we may be just 
painting over the real problem, and that would be really bad to do with dt 
properties.

Note that sending to groeck7@ makes it hard for me to see your emails and to 
reply. Using [email protected] would be much better.

Guenter

Sent from my iPhone

> On Sep 11, 2018, at 7:59 AM, Angus Ainslie (Purism) <[email protected]> wrote:
> 
> If the board is being powered by USB disabling the source and sink
> can remove power from the board. Allow the source and sink to be
> initallized based on devicetree values.
> 
> Changed since V2:
> 
> Change the devicetree documentation.
> Change the devicetree property names.
> 
> Changed since V1:
> 
> use devicetree values instead of hardcoded initialization.
> 
> Signed-off-by: Angus Ainslie (Purism) <[email protected]>
> ---
> .../devicetree/bindings/usb/typec-tcpci.txt        |  6 ++++++
> drivers/usb/typec/tcpm.c                           | 14 +++++++++++---
> 2 files changed, 17 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt 
> b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> index 0dd1469e7318..b07418ae6482 100644
> --- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> +++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> @@ -15,6 +15,12 @@ Required sub-node:
>   of connector node are specified in
>   Documentation/devicetree/bindings/connector/usb-connector.txt
> 
> +Optional properties for usb-c-connector sub-node:
> +- init-vbus-source: set the initalization value for vbus-source to true.
> +  If this property is not present the initial value will be false.
> +- init-vbus-sink: set the initalization value for vbus-sink to true.
> +  If this property is not present the initial value will be false.
> +
> Example:
> 
> ptn5110@50 {
> diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
> index ca7bedb46f7f..10c14ece3858 100644
> --- a/drivers/usb/typec/tcpm.c
> +++ b/drivers/usb/typec/tcpm.c
> @@ -2462,9 +2462,7 @@ static int tcpm_init_vbus(struct tcpm_port *port)
> {
>    int ret;
> 
> -    ret = port->tcpc->set_vbus(port->tcpc, false, false);
> -    port->vbus_source = false;
> -    port->vbus_charge = false;
> +    ret = port->tcpc->set_vbus(port->tcpc, port->vbus_source, 
> port->vbus_charge);
>    return ret;
> }
> 
> @@ -4266,6 +4264,16 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
>        return -EINVAL;
>    port->port_type = port->typec_caps.type;
> 
> +    if (fwnode_property_present(fwnode, "init-vbus-source"))
> +        port->vbus_source = true;
> +    else
> +        port->vbus_source = false;
> +
> +    if (fwnode_property_present(fwnode, "init-vbus-sink"))
> +            port->vbus_charge = true;
> +    else
> +            port->vbus_charge = false;
> +
>    if (port->port_type == TYPEC_PORT_SNK)
>        goto sink;
> 
> -- 
> 2.17.1
> 

Reply via email to