Hi Felipe,

Please let me know if you have any comments on this patch series.
If you think patches are good, can we proceed with them ?

Thanks,
Anurag Kumar Vulisha

>-----Original Message-----
>From: Anurag Kumar Vulisha [mailto:[email protected]]
>Sent: Saturday, October 13, 2018 6:45 PM
>To: Felipe Balbi <[email protected]>; Greg Kroah-Hartman
><[email protected]>; Alan Stern <[email protected]>; Johan
>Hovold <[email protected]>; Jaejoong Kim <[email protected]>; Benjamin
>Herrenschmidt <[email protected]>; Roger Quadros <[email protected]>
>Cc: [email protected]; [email protected];
>[email protected]; Thinh Nguyen <[email protected]>; Tejas Joglekar
><[email protected]>; Ajay Yugalkishore Pandey <[email protected]>;
>Anurag Kumar Vulisha <[email protected]>
>Subject: [PATCH V6 00/10] usb: dwc3: Fix broken BULK stream support to dwc3
>gadget driver
>
>This patch series fixes the broken BULK streaming support in
>dwc3 gadget driver and also adds timer into udc/core.c to avoid deadlock for 
>the
>endpoints which are bulk stream capable.
>
>Changes in v6:
>       1. Added timer into udc/core.c for stream capable endpoint
>          as suggested by "Felipe Balbi"
>
>Changes in v5:
>       1. Removed the dev_dbg prints as suggested bt "Thinh Nguyen"
>
>Changes in v4:
>       1. Corrected the commit message and stream timeout description
>          as suggested by "Thinh Nguyen"
>
>Changes in v3:
>       1. Added the changes suggested by "Thinh Nguyen"
>
>Changes in v2:
>       1. Added "usb: dwc3:" in subject heading
>
>Anurag Kumar Vulisha (10):
>  usb: gadget: udc: Add timer for stream capable endpoints
>  usb: dwc3: gadget: Add stream timeout handler for avoiding deadlock
>  usb: dwc3: gadget: Remove references to dep->stream_capable
>  usb: dwc3: update stream id in depcmd
>  usb: dwc3: make controller clear transfer resources after complete
>  usb: dwc3: don't issue no-op trb for stream capable endpoints
>  usb: dwc3: check for requests in started list for stream capable
>    endpoints
>  usb: dwc3: Correct the logic for checking TRB full in
>    __dwc3_prepare_one_trb()
>  usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl
>    fields
>  usb: dwc3: Check MISSED ISOC bit only for ISOC endpoints
>
> drivers/usb/dwc3/core.h       |  2 --
> drivers/usb/dwc3/gadget.c     | 67 +++++++++++++++++++++++++++++++++-------
> drivers/usb/gadget/udc/core.c | 71
>++++++++++++++++++++++++++++++++++++++++++-
> include/linux/usb/gadget.h    | 12 ++++++++
> 4 files changed, 138 insertions(+), 14 deletions(-)
>
>--
>2.1.1

Reply via email to