On Fri, Nov 16, 2018 at 8:29 PM Chen Yu <[email protected]> wrote:
>
> Hi,
>
> On 2018/11/13 0:02, Rob Herring wrote:
> > On Sat, Oct 27, 2018 at 05:58:11PM +0800, Yu Chen wrote:
> >> This patch adds binding descriptions to support the dwc3 controller
> >> on HiSilicon SoCs and boards like the HiKey960.
> >>
> >> Cc: Greg Kroah-Hartman <[email protected]>
> >> Cc: Rob Herring <[email protected]>
> >> Cc: Mark Rutland <[email protected]>
> >> Cc: John Stultz <[email protected]>
> >> Signed-off-by: Yu Chen <[email protected]>
> >> ---
> >> .../devicetree/bindings/usb/dwc3-hisi.txt | 53
> >> ++++++++++++++++++++++
> >> 1 file changed, 53 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/usb/dwc3-hisi.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
> >> b/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
> >> new file mode 100644
> >> index 000000000000..e715e7b1c324
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/usb/dwc3-hisi.txt
> >> @@ -0,0 +1,53 @@
> >> +HiSilicon DWC3 USB SoC controller
> >> +
> >> +This file documents the parameters for the dwc3-hisi driver.
> >> +
> >> +Required properties:
> >> +- compatible: should be "hisilicon,hi3660-dwc3"
> >> +- clocks: A list of phandle + clock-specifier pairs for the
> >> + clocks listed in clock-names
> >> +- clock-names: Specify clock names
> >> +- resets: list of phandle and reset specifier pairs.
> >> +
> >> +Sub-nodes:
> >> +The dwc3 core should be added as subnode to HiSilicon DWC3 as shown in the
> >> +example below. The DT binding details of dwc3 can be found in:
> >> +Documentation/devicetree/bindings/usb/dwc3.txt
> >
> > If you only have clocks and resets and no glue registers, then you
> > don't need a sub-node. Just make the controller one node.
> >
>
> In dwc3 glue driver，the controller driver usually probed by call
> of_platform_populate
> which will search the child node of glue driver.
> The code of function of_platform_populate is as below:
>
> for_each_child_of_node(root, child) {
> rc = of_platform_bus_create(child, matches, lookup, parent,
> true);
> if (rc) {
> of_node_put(child);
> break;
> }
> }
>
> So I think the controller node should be a sub-node.
It was done that way, but has changed. See commit fe8abf332b8f ("usb:
dwc3: support clocks and resets for DWC3 core").
Rob
