> > Signed-off-by: Peter Chen <[email protected]>
> > ---
> > arch/arm/boot/dts/imx7ulp.dtsi | 31 +++++++++++++++++++++++++++++++
> > 1 file changed, 31 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx7ulp.dtsi
> > b/arch/arm/boot/dts/imx7ulp.dtsi index fca6e50f37c8..37b058119505
> > 100644
> > --- a/arch/arm/boot/dts/imx7ulp.dtsi
> > +++ b/arch/arm/boot/dts/imx7ulp.dtsi
> > @@ -30,6 +30,7 @@
> > serial1 = &lpuart5;
> > serial2 = &lpuart6;
> > serial3 = &lpuart7;
> > + usbphy0 = &usbphy1;
> > };
> >
> > cpus {
> > @@ -133,6 +134,36 @@
> > clock-names = "ipg", "per";
> > };
> >
> > + usbotg1: usb@40330000 {
> > + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb",
> > + "fsl,imx27-usb";
>
> If "fsl,imx6ul-usb" is the one that imx7ulp device is compatible with and
> will match in
> driver, "fsl,imx27-usb" can just be dropped. Same comment on usbmisc and
> usbphy below.
>
Ok, will change, thanks.
Peter
> Shawn
>
> > + reg = <0x40330000 0x200>;
> > + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&pcc2 IMX7ULP_CLK_USB0>;
> > + phys = <&usbphy1>;
> > + fsl,usbmisc = <&usbmisc1 0>;
> > + ahb-burst-config = <0x0>;
> > + tx-burst-size-dword = <0x8>;
> > + rx-burst-size-dword = <0x8>;
> > + status = "disabled";
> > + };
> > +
> > + usbmisc1: usbmisc@40330200 {
> > + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
> > + "fsl,imx6q-usbmisc";
> > + #index-cells = <1>;
> > + reg = <0x40330200 0x200>;
> > + };
> > +
> > + usbphy1: usbphy@0x40350000 {
> > + compatible = "fsl,imx7ulp-usbphy",
> > + "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
> > + reg = <0x40350000 0x1000>;
> > + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
> > + #phy-cells = <0>;
> > + };
> > +
> > usdhc0: mmc@40370000 {
> > compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
> > reg = <0x40370000 0x10000>;
> > --
> > 2.14.1
> >
