From: Hans Ulli Kroll <ulli.kr...@googlemail.com>
On the Gemini SoC the FOTG2 stalls after port reset
so restart the HCD after each port reset.
Signed-off-by: Hans Ulli Kroll <ulli.kr...@googlemail.com>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
---
drivers/usb/host/fotg210-hcd.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 35f69bce40d9..8ee28f5b7957 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1633,6 +1633,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16
typeReq, u16 wValue,
/* see what we found out */
temp = check_reset_complete(fotg210, wIndex, status_reg,
fotg210_readl(fotg210, status_reg));
+
+ /* restart schedule */
+ fotg210->command |= CMD_RUN;
+ fotg210_writel(fotg210, fotg210->command,
&fotg210->regs->command);
}
if (!(temp & (PORT_RESUME|PORT_RESET))) {
--
2.21.0
