[Resend - had mailer errors ] Hi Florian,
today i have seen a strange behaviour of two D-Link DUB-1312 adapters (same Revision A1). Plugging them into the same port (!) on my device one of them is recognized as SuperSpeed, the other as high speed ??? (working on 4.14.129 LTS) >From dmesg, the "faulty" one: [ 530.585871] usb 1-2: new high-speed USB device number 4 using xhci_hcd <<<<<<<<< HUH ???? [ 530.718872] usb 1-2: New USB device found, idVendor=2001, idProduct=4a00 [ 530.718880] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 530.718885] usb 1-2: Product: D-Link DUB-1312 [ 530.718889] usb 1-2: Manufacturer: D-Link Elec. Corp. [ 530.718893] usb 1-2: SerialNumber: 000000000024B9 [ 531.055104] ax88179_178a 1-2:1.0 eth0: register 'ax88179_178a' at usb-0000:00:15.0-2, D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter, f4:8c:eb:4b:49:4e [ 1151.424860] usb 1-2: USB disconnect, device number 4 And here comes the "good" one: [ 1151.425110] ax88179_178a 1-2:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:15.0-2, D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter [ 1157.886447] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd <<<<<<<<<<< FINE !!!! [ 1157.905885] usb 2-2: New USB device found, idVendor=2001, idProduct=4a00 [ 1157.905893] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1157.905898] usb 2-2: Product: D-Link DUB-1312 [ 1157.905902] usb 2-2: Manufacturer: D-Link Elec. Corp. [ 1157.905906] usb 2-2: SerialNumber: 00000000000AF2 [ 1158.246076] ax88179_178a 2-2:1.0 eth0: register 'ax88179_178a' at usb-0000:00:15.0-2, D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter, 40:9b:cd:73:f1:f3 As you can see, same Vendor and Product ID. (And really: it is the same connector i plugged it in!) I had a look at the driver code of ax88179, but that one didn't change much in the past up to v5.2. Nothing that explains what i can see here. What can i do to dig deeper why this happens? Best regards Carsten
