When operating with LPM signals, the controller asserts the deep
low-power signal (utmi_l1_suspend_n) to the phy when the BESL value of
the LPM token is equal to or greater than DCTL.HIRD_Thres[3:0] (and
with DCTL.HIRD_Thres[4] set). Otherwise, the shallow low-power signal
(utmi_sleep_n) is asserted. Set the recommended deep BESL equal to the
controller's DCTL.HIRD_Thres[3:0] setting, and set the baseline BESL
to 0 for the shallow low-power signal. This maximizes the opportunity
for L1 residency and optimizes power savings.
Signed-off-by: Thinh Nguyen <thi...@synopsys.com>
---
drivers/usb/dwc3/gadget.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index afc2ddb080ae..8ac024c5147a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2078,6 +2078,16 @@ static void dwc3_gadget_config_params(struct usb_gadget
*g,
{
struct dwc3 *dwc = gadget_to_dwc(g);
+ params->besl_baseline = USB_DEFAULT_BESL_UNSPECIFIED;
+ params->besl_deep = USB_DEFAULT_BESL_UNSPECIFIED;
+
+ /* Recommended BESL */
+ if (!dwc->dis_enblslpm_quirk) {
+ params->besl_baseline = 0;
+ if (dwc->is_utmi_l1_suspend)
+ params->besl_deep = min_t(u8, dwc->hird_threshold, 15);
+ }
+
/* U1 Device exit Latency */
if (dwc->dis_u1_entry_quirk)
params->bU1devExitLat = 0;
--
2.11.0
