On Mon, Aug 26, 2019 at 12:46:30PM +0800, Kai-Heng Feng wrote: > Auto-delink requires writing special registers to ums-realtek device. > Unconditionally enable auto-delink may break newer devices. > > So only enable auto-delink by default for the original three IDs, > 0x0138, 0x0158 and 0x0159. > > Realtek is working on a patch to properly support auto-delink for other > IDs. > > BugLink: https://bugs.launchpad.net/bugs/1838886 > Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com> > --- > drivers/usb/storage/realtek_cr.c | 24 +++++++++++++++++++----- > 1 file changed, 19 insertions(+), 5 deletions(-) > > diff --git a/drivers/usb/storage/realtek_cr.c > b/drivers/usb/storage/realtek_cr.c > index 4d86cfcc0b40..376f41d0cbc3 100644 > --- a/drivers/usb/storage/realtek_cr.c > +++ b/drivers/usb/storage/realtek_cr.c > @@ -36,6 +36,10 @@ MODULE_DESCRIPTION("Driver for Realtek USB Card Reader"); > MODULE_AUTHOR("wwang <wei_w...@realsil.com.cn>"); > MODULE_LICENSE("GPL"); > > +static int auto_delink_enable = -1; > +module_param(auto_delink_enable, int, S_IRUGO | S_IWUSR); > +MODULE_PARM_DESC(auto_delink_enable, "enable auto delink (-1=auto [default], > 0=disable, 1=enable)"); > + > static int auto_delink_mode = 1; > module_param(auto_delink_mode, int, S_IRUGO | S_IWUSR); > MODULE_PARM_DESC(auto_delink_mode, "auto delink mode (0=firmware, 1=software > [default])"); > @@ -996,12 +1000,22 @@ static int init_realtek_cr(struct us_data *us) > goto INIT_FAIL; > }
This patch doesn't apply as I can't take your first patch. Can you redo it and resend? thanks, greg k-h
