From: Yegor Yefremov <yegorsli...@googlemail.com>
Add additional port statistics like received and transmitted bytes
the way /proc/tty/driver/serial does.
As usbserial driver already provides USB related information and
this line is longer than 100 characters, this patch adds an
additional line with the same port number:
0: module:ftdi_sio name:"FTDI USB Serial Device" vendor:0403 ...
0: tx:112 rx:0
Signed-off-by: Yegor Yefremov <yegorsli...@googlemail.com>
---
drivers/usb/serial/usb-serial.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index a3179fea38c8..154e65b6895f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -42,6 +42,9 @@
#define USB_SERIAL_TTY_MAJOR 188
#define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */
+static int serial_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
+
/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
the MODULE_DEVICE_TABLE declarations in each serial driver
cause the "hotplug" program to pull in whatever module is necessary
@@ -471,10 +474,13 @@ static int serial_proc_show(struct seq_file *m, void *v)
seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) {
+ struct tty_struct *tty;
+ struct serial_icounter_struct icount;
port = usb_serial_port_get_by_minor(i);
if (port == NULL)
continue;
serial = port->serial;
+ tty = port->port.tty;
seq_printf(m, "%d:", i);
if (serial->type->driver.owner)
@@ -491,6 +497,22 @@ static int serial_proc_show(struct seq_file *m, void *v)
seq_printf(m, " path:%s", tmp);
seq_putc(m, '\n');
+ if (!serial_get_icount(tty, &icount)) {
+ seq_printf(m, "%d:", i);
+ seq_printf(m, " tx:%d rx:%d",
+ icount.tx, icount.rx);
+ if (icount.frame)
+ seq_printf(m, " fe:%d", icount.frame);
+ if (icount.parity)
+ seq_printf(m, " pe:%d", icount.parity);
+ if (icount.brk)
+ seq_printf(m, " brk:%d", icount.brk);
+ if (icount.overrun)
+ seq_printf(m, " oe:%d", icount.overrun);
+ if (icount.buf_overrun)
+ seq_printf(m, " bo:%d", icount.buf_overrun);
+ seq_putc(m, '\n');
+ }
usb_serial_put(serial);
mutex_unlock(&serial->disc_mutex);
}
--
2.17.0
