From: Chandana Kishori Chiluveru <cchil...@codeaurora.org>
Add documentation for the interconnects and interconnect-names
properties for USB as detailed by bindings/interconnect/interconnect.txt.
Signed-off-by: Chandana Kishori Chiluveru <cchil...@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <m...@chromium.org>
---
Documentation/devicetree/bindings/usb/qcom,dwc3.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index cb695aa..63c21c6 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -33,6 +33,16 @@ Optional clocks:
Optional properties:
- resets: Phandle to reset control that resets core and wrapper.
+- interconnects: Pairs of phandles and interconnect provider specifiers
+ to denote the edge source and destination ports of
+ the interconnect path. Please refer to
+ Documentation/devicetree/bindings/interconnect/
+ for more details.
+- interconnect-names: List of interconnect path name strings sorted in the
same
+ order as the interconnects property. Consumer drivers
will use
+ interconnect-names to match interconnect paths with
interconnect
+ specifiers. Please refer to
Documentation/devicetree/bindings/
+ interconnect/ for more details.
- interrupts: specifies interrupts from controller wrapper used
to wakeup from low power/susepnd state. Must contain
one or more entry for interrupt-names property
@@ -74,6 +84,9 @@ Example device nodes:
#size-cells = <1>;
ranges;
+ interconnects = <&qnoc MASTER_USB3_0 &qnoc SLAVE_EBI1>,
+ <&qnoc MASTER_APPSS_PROC &qnoc
SLAVE_USB3_0>;
+ interconnect-names = "usb-ddr", "apps-usb";
interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
