[PATCH V2 6/8] usb/dwc3: No need to pass params in case of UPDATE TRANSFER

[Pratyush Anand]

UPDATE transfer does not need any parameters. So, no need to prepare it.

Signed-off-by: Pratyush Anand <pratyush.an...@st.com>
---
 drivers/usb/dwc3/gadget.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c7f1cdb..0ac2ec3 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -974,13 +974,14 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep 
*dep, u16 cmd_param,
        }
 
        memset(&params, 0, sizeof(params));
-       params.param0 = upper_32_bits(req->trb_dma);
-       params.param1 = lower_32_bits(req->trb_dma);
 
-       if (start_new)
+       if (start_new) {
+               params.param0 = upper_32_bits(req->trb_dma);
+               params.param1 = lower_32_bits(req->trb_dma);
                cmd = DWC3_DEPCMD_STARTTRANSFER;
-       else
+       } else {
                cmd = DWC3_DEPCMD_UPDATETRANSFER;
+       }
 
        cmd |= DWC3_DEPCMD_PARAM(cmd_param);
        ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html