On Mon, Jan 21, 2013 at 10:30:01AM +0800, Peter Chen wrote:
> During the system suspend/resume procedure, the USB also
> needs to go suspend/resume procedure, this patch adds
> related APIs. It is tested at i.mx6q sabrelite. Meanwhile,
> it fixes the bug that the USB will out of work after
> system suspend/resume.
>
> Signed-off-by: Peter Chen <[email protected]>
> Tested-by: Shawn Guo <[email protected]>
ping....
Alex, can you help review it?
> ---
> Changes for v2:
> - Add tested-by from Shawn Guo
> - Using dev_get_drvdata to get driver data
>
> drivers/usb/chipidea/bits.h | 1 +
> drivers/usb/chipidea/ci13xxx_imx.c | 59
> ++++++++++++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
> index ba9c6ef..d1467bb 100644
> --- a/drivers/usb/chipidea/bits.h
> +++ b/drivers/usb/chipidea/bits.h
> @@ -47,6 +47,7 @@
> #define PORTSC_FPR BIT(6)
> #define PORTSC_SUSP BIT(7)
> #define PORTSC_HSP BIT(9)
> +#define PORTSC_PHCD BIT(23) /* phy suspend mode */
> #define PORTSC_PTC (0x0FUL << 16)
>
> /* DEVLC */
> diff --git a/drivers/usb/chipidea/ci13xxx_imx.c
> b/drivers/usb/chipidea/ci13xxx_imx.c
> index 342eab0..ff11cee 100644
> --- a/drivers/usb/chipidea/ci13xxx_imx.c
> +++ b/drivers/usb/chipidea/ci13xxx_imx.c
> @@ -25,6 +25,7 @@
> #include <linux/mfd/syscon.h>
>
> #include "ci.h"
> +#include "bits.h"
> #include "ci13xxx_imx.h"
>
> #define pdev_to_phy(pdev) \
> @@ -321,6 +322,61 @@ static int ci13xxx_imx_remove(struct platform_device
> *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM
> +static int ci13xxx_imx_suspend(struct device *dev)
> +{
> + struct ci13xxx_imx_data *data = dev_get_drvdata(dev);
> + struct platform_device *plat_ci;
> + struct ci13xxx *ci;
> +
> + plat_ci = data->ci_pdev;
> + ci = platform_get_drvdata(plat_ci);
> +
> + hw_write(ci, OP_PORTSC, PORTSC_PHCD, PORTSC_PHCD);
> +
> + if (data->phy)
> + usb_phy_set_suspend(data->phy, 1);
> +
> + clk_disable_unprepare(data->clk);
> +
> + return 0;
> +}
> +
> +static int ci13xxx_imx_resume(struct device *dev)
> +{
> + int ret;
> + struct ci13xxx_imx_data *data = dev_get_drvdata(dev);
> + struct platform_device *plat_ci;
> + struct ci13xxx *ci;
> +
> + plat_ci = data->ci_pdev;
> + ci = platform_get_drvdata(plat_ci);
> +
> + ret = clk_prepare_enable(data->clk);
> + if (ret) {
> + dev_err(dev,
> + "Failed to prepare or enable clock, err=%d\n", ret);
> + return ret;
> + }
> +
> + if (hw_read(ci, OP_PORTSC, PORTSC_PHCD)) {
> + hw_write(ci, OP_PORTSC, PORTSC_PHCD, 0);
> + /* Some clks sync between Controller and USB PHY */
> + mdelay(1);
> + }
> +
> + if (data->phy)
> + usb_phy_set_suspend(data->phy, 0);
> +
> + return ret;
> +}
> +
> +static const struct dev_pm_ops ci13xxx_imx_pm_ops = {
> + .suspend = ci13xxx_imx_suspend,
> + .resume = ci13xxx_imx_resume,
> +};
> +#endif
> +
> static const struct of_device_id ci13xxx_imx_dt_ids[] = {
> { .compatible = "fsl,imx27-usb", },
> { /* sentinel */ }
> @@ -334,6 +390,9 @@ static struct platform_driver ci13xxx_imx_driver = {
> .name = "imx_usb",
> .owner = THIS_MODULE,
> .of_match_table = ci13xxx_imx_dt_ids,
> +#ifdef CONFIG_PM
> + .pm = &ci13xxx_imx_pm_ops,
> +#endif
> },
> };
>
> --
> 1.7.0.4
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
