we have generic implementations for a reason,
let's use them
Signed-off-by: Felipe Balbi <[email protected]>
---
drivers/usb/musb/musb_gadget.c | 158 ++++++++++++++---------------------------
1 file changed, 53 insertions(+), 105 deletions(-)
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index e363033..bb62c7c 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -90,9 +90,6 @@
/* ----------------------------------------------------------------------- */
-#define is_buffer_mapped(req) (is_dma_capable() && \
- (req->map_state != UN_MAPPED))
-
/* Maps the buffer to dma */
static inline void map_dma_buffer(struct musb_request *request,
@@ -101,8 +98,6 @@ static inline void map_dma_buffer(struct musb_request
*request,
int compatible = true;
struct dma_controller *dma = musb->dma_controller;
- request->map_state = UN_MAPPED;
-
if (!is_dma_capable() || !musb_ep->dma)
return;
@@ -117,55 +112,14 @@ static inline void map_dma_buffer(struct musb_request
*request,
if (!compatible)
return;
- if (request->request.dma == DMA_ADDR_INVALID) {
- request->request.dma = dma_map_single(
- musb->controller,
- request->request.buf,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->map_state = MUSB_MAPPED;
- } else {
- dma_sync_single_for_device(musb->controller,
- request->request.dma,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->map_state = PRE_MAPPED;
- }
+ (void) usb_gadget_map_request(&musb->g, &request->request, request->tx);
}
/* Unmap the buffer from dma and maps it back to cpu */
static inline void unmap_dma_buffer(struct musb_request *request,
struct musb *musb)
{
- if (!is_buffer_mapped(request))
- return;
-
- if (request->request.dma == DMA_ADDR_INVALID) {
- dev_vdbg(musb->controller,
- "not unmapping a never mapped buffer\n");
- return;
- }
- if (request->map_state == MUSB_MAPPED) {
- dma_unmap_single(musb->controller,
- request->request.dma,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->request.dma = DMA_ADDR_INVALID;
- } else { /* PRE_MAPPED */
- dma_sync_single_for_cpu(musb->controller,
- request->request.dma,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
- request->map_state = UN_MAPPED;
+ usb_gadget_unmap_request(&musb->g, &request->request, request->tx);
}
/*
@@ -365,7 +319,7 @@ static void txstate(struct musb *musb, struct musb_request
*req)
csr);
#ifndef CONFIG_MUSB_PIO_ONLY
- if (is_buffer_mapped(req)) {
+ {
struct dma_controller *c = musb->dma_controller;
size_t request_size;
@@ -688,7 +642,7 @@ static void rxstate(struct musb *musb, struct musb_request
*req)
return;
}
- if (is_cppi_enabled() && is_buffer_mapped(req)) {
+ if (is_cppi_enabled()) {
struct dma_controller *c = musb->dma_controller;
struct dma_channel *channel = musb_ep->dma;
@@ -731,14 +685,13 @@ static void rxstate(struct musb *musb, struct
musb_request *req)
if (request->actual < request->length) {
#ifdef CONFIG_USB_INVENTRA_DMA
- if (is_buffer_mapped(req)) {
- struct dma_controller *c;
- struct dma_channel *channel;
- int use_dma = 0;
- int transfer_size;
+ struct dma_controller *c;
+ struct dma_channel *channel;
+ int use_dma = 0;
+ int transfer_size;
- c = musb->dma_controller;
- channel = musb_ep->dma;
+ c = musb->dma_controller;
+ channel = musb_ep->dma;
/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
* mode 0 only. So we do not get endpoint interrupts due to DMA
@@ -761,53 +714,50 @@ static void rxstate(struct musb *musb, struct
musb_request *req)
* then becomes usable as a runtime "use mode 1" hint...
*/
- /* Experimental: Mode1 works with mass storage
use cases */
- if (use_mode_1) {
- csr |= MUSB_RXCSR_AUTOCLEAR;
- musb_writew(epio, MUSB_RXCSR, csr);
- csr |= MUSB_RXCSR_DMAENAB;
- musb_writew(epio, MUSB_RXCSR, csr);
+ /* Experimental: Mode1 works with mass storage use
cases */
+ if (use_mode_1) {
+ csr |= MUSB_RXCSR_AUTOCLEAR;
+ musb_writew(epio, MUSB_RXCSR, csr);
+ csr |= MUSB_RXCSR_DMAENAB;
+ musb_writew(epio, MUSB_RXCSR, csr);
- /*
- * this special sequence (enabling and
then
- * disabling MUSB_RXCSR_DMAMODE) is
required
- * to get DMAReq to activate
- */
- musb_writew(epio, MUSB_RXCSR,
+ /*
+ * this special sequence (enabling and then
+ * disabling MUSB_RXCSR_DMAMODE) is required
+ * to get DMAReq to activate
+ */
+ musb_writew(epio, MUSB_RXCSR,
csr | MUSB_RXCSR_DMAMODE);
- musb_writew(epio, MUSB_RXCSR, csr);
+ musb_writew(epio, MUSB_RXCSR, csr);
- transfer_size = min(request->length -
request->actual,
- channel->max_len);
- musb_ep->dma->desired_mode = 1;
+ transfer_size = min(request->length -
request->actual,
+ channel->max_len);
+ musb_ep->dma->desired_mode = 1;
- } else {
- if (!musb_ep->hb_mult &&
+ } else {
+ if (!musb_ep->hb_mult &&
musb_ep->hw_ep->rx_double_buffered)
- csr |= MUSB_RXCSR_AUTOCLEAR;
- csr |= MUSB_RXCSR_DMAENAB;
- musb_writew(epio, MUSB_RXCSR, csr);
+ csr |= MUSB_RXCSR_AUTOCLEAR;
+ csr |= MUSB_RXCSR_DMAENAB;
+ musb_writew(epio, MUSB_RXCSR, csr);
- transfer_size = min(request->length -
request->actual,
- (unsigned)fifo_count);
- musb_ep->dma->desired_mode = 0;
- }
+ transfer_size = min(request->length -
request->actual,
+ (unsigned)fifo_count);
+ musb_ep->dma->desired_mode = 0;
+ }
- use_dma = c->channel_program(
- channel,
- musb_ep->packet_sz,
- channel->desired_mode,
- request->dma
- + request->actual,
- transfer_size);
+ use_dma = c->channel_program(
+ channel,
+ musb_ep->packet_sz,
+ channel->desired_mode,
+ request->dma
+ + request->actual,
+ transfer_size);
- if (use_dma)
- return;
- }
+ if (use_dma)
+ return;
#elif defined(CONFIG_USB_UX500_DMA)
- if ((is_buffer_mapped(req)) &&
- (request->actual < request->length)) {
-
+ if (request->actual < request->length) {
struct dma_controller *c;
struct dma_channel *channel;
int transfer_size = 0;
@@ -862,7 +812,7 @@ static void rxstate(struct musb *musb, struct musb_request
*req)
fifo_count = min_t(unsigned, len, fifo_count);
#ifdef CONFIG_USB_TUSB_OMAP_DMA
- if (tusb_dma_omap() && is_buffer_mapped(req)) {
+ if (tusb_dma_omap()) {
struct dma_controller *c = musb->dma_controller;
struct dma_channel *channel = musb_ep->dma;
u32 dma_addr = request->dma + request->actual;
@@ -882,16 +832,14 @@ static void rxstate(struct musb *musb, struct
musb_request *req)
* programming fails. This buffer is mapped if the
* channel allocation is successful
*/
- if (is_buffer_mapped(req)) {
- unmap_dma_buffer(req, musb);
+ unmap_dma_buffer(req, musb);
- /*
- * Clear DMAENAB and AUTOCLEAR for the
- * PIO mode transfer
- */
- csr &= ~(MUSB_RXCSR_DMAENAB |
MUSB_RXCSR_AUTOCLEAR);
- musb_writew(epio, MUSB_RXCSR, csr);
- }
+ /*
+ * Clear DMAENAB and AUTOCLEAR for the
+ * PIO mode transfer
+ */
+ csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+ musb_writew(epio, MUSB_RXCSR, csr);
musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
(request->buf + request->actual));
--
1.8.1.rc1.5.g7e0651a
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
