Hello,
I have an x86 board made by STMicroelectronics (STA2X11) with the Synopsis
USB-OTG DesignWare 2 on it and connected through the PCI-e bus.
I know that there are two drivers for the same controller:
(host) drivers/staging/dwc2/*
(device) drivers/usb/gadget/s3c-hsotg.{c|h}
So, at the moment I cannot have a board with both host/device working at the
same time. I have to choose to use the block as device or host, right?
I know that the plan is to merge the s3c-hsotg in the dwc2 driver
(https://lwn.net/Articles/540283/). Are still accepted patch to s3c-hsotg? Or
it is work in progress right now (soon), so it is better to wait after the
merge?
In order to use the s3c-hsotg I must implement a PCI wrapper that uses this
driver. It will be accepted in the kernel even if it will be removed sooner or
later because of the driver merge?
Thank you :)
--
Federico Vaga
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
