Hi,
This is probably a minor issue, but when plugin the Fitbit base station
dongle, I'm getting some weird serial number in dmesg.
Can something be done here?
Kind regards
Laurent Bigonville
[ 9993.722197] usb 1-1.2: new full-speed USB device number 7 using ehci-pci
[ 9993.820617] usb 1-1.2: New USB device found, idVendor=2687, idProduct=fb01
[ 9993.820622] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 9993.820625] usb 1-1.2: Product: Fitbit Base Station
[ 9993.820627] usb 1-1.2: Manufacturer: Fitbit Inc.
[ 9993.820629] usb 1-1.2: SerialNumber:
\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf\xffffffef\xffffffbf\xffffffbf\xffffffbf\xffffffbf
[ 9993.824615] hid-generic 0003:2687:FB01.0008: hiddev0,hidraw1: USB HID v1.11
Device [Fitbit Inc. Fitbit Base Station] on usb-0000:00:1a.0-1.2/input0
[ 9993.827453] hid-generic 0003:2687:FB01.0009: hiddev0,hidraw2: USB HID v1.11
Device [Fitbit Inc. Fitbit Base Station] on usb-0000:00:1a.0-1.2/input1
Bus 001 Device 007: ID 2687:fb01
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 32
idVendor 0x2687
idProduct 0xfb01
bcdDevice 1.00
iManufacturer 1 Fitbit Inc.
iProduct 2 Fitbit Base Station
iSerial 3 ����������������
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 73
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 54
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 2
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 54
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 2
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 2
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
